Ignition Switch - Chevrolet Trailblazer Service Manual

Ignition Switch

Removal & Installation
Except Saab
To Remove:
1. Disable the SIR system by disconnecting the negative battery cable.
2. Remove the left insulator panel and knee bolster from under the instrument panel
(I/P).
3. Remove the trim covers from the steering column.
4. Release the ignition lock cylinder locking tab by inserting an allen wrench into the
hole on the top of the ignition lock cylinder housing and pushing down.
5.
Ignition lock cylinder removal and installation (Except Saab)
6. Remove the ignition lock cylinder from the ignition lock cylinder housing.
7. Disconnect the passlock and key buzzer from the ignition lock cylinder housing.