Rear Window Wiper Motor Removal And Installation (Gmc Envoy Xuv) - Chevrolet Trailblazer Service Manual

GMC Envoy XUV
To Remove:
1. Remove the wiper arm and spacer from the pivot shaft.
2. Remove the interior trim panel from the endgate.
3. Remove the window from the endgate.
4. Disconnect the rear wiper motor connector.
Rear window wiper motor removal and installation (GMC
5. Detach the rear wiper motor from the endgate.
To Install:
1. Attach the wiper motor to the endgate. Torque the nuts and bolts to 71 in-lb (8
Nm).
2. Connect the rear wiper motor connector.
3. Install the window onto the endgate.
4. Install the interior trim panel to the endgate.
5. Install the spacer and wiper arm onto the pivot shaft.
6. Make sure the rear wiper is operating properly.
Envoy XUV)