5.3L & 6.0L Engines
To Remove:
1. Remove the drive belt from the pulleys.
2. Remove the A/C drive belt from the pulleys.
3. Remove the cooling fan and starter from the engine.
4. Install a J 42386-A flywheel holding tool onto the flywheel. Torque the bolt to 37 ft-
lb (50 Nm).
5. Remove the crankshaft balancer bolt from the crankshaft balancer.
6. crankshaft end protector into the end of the crankshaft and remove the crankshaft
balancer.
7. crankshaft end protector from the crankshaft balancer.
Crankshaft balancer removal