Entertainment Systems
WARNING
To avoid personal injury and/or vehicle damage, refer to the service precautions at the
beginning of this section.
Radio
Removal & Installation
To Remove:
1. For GMC vehicles, remove the lower closeout/insulator panel from the instrument
panel (I/P).
2. For Oldsmobile vehicles, remove the center console shift lever bezel from the
center console.
3. Remove the accessory trim plate from the instrument panel (I/P).
4. Remove the retaining screws from the radio.
5. Pull the radio out of the instrument panel (I/P) far enough to gain access to the
radio connectors
6. Disconnect the radio antenna cable from the radio.
7. Disconnect the radio connectors.
Radio removal and installation