Matrix Voice Module; Mx-Voice Module Programming - Pyronix Matrix 424 Installation Manual

Hide thumbs Also See for Matrix 424:
Table of Contents

Advertisement

2.7 Matrix Voice Module

Speaker for playing
recorded messages
Microphone

2.7.1 MX-VOICE Module Programming

Programming the MX-VOICE module consists of recording spoken messages (Voice message) via the onboard
microphone. The number of a voice message should be selected before recording and the message may be
played via the on-board speaker after recording. The MX-VOICE module can be programmed even if not
connected to the panel. In this case, a 9-12V power supply must be connected between the «+BAT-»
terminals.
PROGRAMMING
Initial state: MX-VOICE module should be connected to the panel or power supply unit.
Step 1 - SELECT VOICE MESSAGE NUMBER.
reached
(
...
Step 2 -
RECORDING. Press the «PLAY/RECORD» key (the voice message number starts flashing to indicate
that recording has started) and hold it down while speaking into the on-board microphone. Release
the «PLAY/RECORD» key after the message is finished. End of recording will be indicated as . The
maximum length of one message is 7 seconds.
Step 3 - PLAYING A VOICE MESSAGE.
NUMBER» key (the message number is displayed on the LED), then press the «PLAY/RECORD» key
once. The voice message will be played via the on-board speaker.
NOTE 1: Recorded messages are stored in the MX-VOICE module which was used for programming
these messages only, and are not stored in the panel's NVM. NOTE 2: To enable the MX-VOICE module
it is required to set the "Voice message" reporting format for the used telephone and allocate the
number of voice messages for the event groups (Send Options).
RINS918-6
MICROPHONE
NBUSJY
Press the «MESSAGE NUMBER» key until the required number is
is displayed on the LED).
Choose the required voice message by pressing the «MESSAGE
Matrix 424, 832, 832+ Installation Manual
Data & power connection using the cable supplied
PLAY/RECORD
832+
R
Supply input 9-12V
for recording/playing
messages if disconnected
from panel
Message number
indicator
MESSAGE
NUMBER
1-8
Select
Message Key
Play / Record
Key
R
Page 17

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Matrix 424 and is the answer not in the manual?

This manual is also suitable for:

Matrix 832

Table of Contents