Thru Hull Fittings; Grab Rails - Pro-Line Boats 2010 29 Express Owner's Manual

stand on the bow rail or use it as leverage when pulling up an anchor, a fish or any other objects. Do not use the
bow rail to tie off and/or secure a large catch, etc.

Thru Hull Fittings

Thru hull fittings provide overboard drainage. The following photos indicate the source of drainage for each of the
thru hulls:
Left to Right
A/C pump out
Forward bilge pump
Shower sump pump
Galley sink
Top Row / Left to Right
Main aft bilge pump
Generator
Bottom Row / Left to Right
1) Starboard fish box pump
2) Inboard and/or outboard
cockpit drains

Grab Rails

A set of stainless steel grab rails has been installed to provide safe boarding and navigation on the boat. They
are located at the starboard transom ladder, around the baitwell station and in the galley
Port Side
Fresh water
tank vent
Starboard Side
Left to Right
Fuel and waste vents
Left to Right
Overboard discharge (Opt)
Bait prep station
Baitwell overflow
These 3 thru hulls are interchangeable)
Top Row / Left to Right
1) High water bilge pump
2) Transom sink
Bottom Row / Left to Right
Inboard and outboard cockpit drains
Fish box pump
Anchor locker
Head sink drain
42