Display; Auto Pc Adjusting - Eiki EK-510U Owner's Manual

Auto PC Adjusting

The Auto PC Adjusting function may get Total Dots, Horizontal and Vertical position, Display area H,
and Display area V aligned with computer input.
Direct Operation
Press Auto button on the remote control to
launch the Auto PC Adj. function.
Menu Operation
1 Press the MENU button on remote controller
and the OSD displays. Press
select Display icon. Press  button or OK
button and the Display menu displays.
2 Press button to point to Auto PC Adj. op-
tion, press OK button to confirm your choice.
Note:
● Fine sync., H and V position and H Size of certain computers may be fully adjusted by the
Auto PC Adjusting function. In case the post-adjustment image still looks incorrect, adjust
it again manually.
● The Auto PC Adjusting, H and V position function will be disabled once 480i, 576i, 480p,
576p, 720p, 1080i or 1080p has been selected in the system menu.
OSD Setting-Display
button to
AUTO
Display menu

Display

Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
Note:
- The projector executes the Auto PC adjustment
automatically when the computer signals input the
projector for the first time.
- Auto PC adjustment may not work depending on
the model of the computer and the input signal.
- The Auto PC adjustment cannot be operated
when 480i, 576i, 480p, 576p, 720p 1080i or 1080p
is selected in the "Display" menu → "System", or
when the signal is coming from the HDMI terminal.
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz
37