Ptz Control Panel - Revo R16DVR3 User Manual

User's Manual








NOTE: Refer to Appendix – Map Editor, Device Setting section for more details about the
popup function.
To connect to the remote site, select the device you want to connect to from the Map panel and then drag and drop it in
the desired position on the screen or the Status View panel. Also, placing the mouse cursor on the device on the map
displays the device status. When the device detects any event or the device is not working properly, the following status
icons appear (maximum of 4).
Unplugged
Video Blind
NOTE: The device status is displayed as Irregular based on to the system check settings and as each event
according to the event detection settings on the remote DVR.
NOTE: Some event icons may not be supported, depending on the specifications and version of the remote DVR.
Clicking the right mouse button on the Map panel causes a text menu screen to display. Selecting Watch Event View
from the menu displays the event information of the connected remote sites. Selecting Close disconnects the current
connection on the Map panel.

PTZ Control Panel

10
x0.25 to x2: Sets the desired size of the Map popup screen.
Full Screen: Enters the full-screen mode of the Map popup screen.
Transparency...: Adjusts the transparency of the popup screen.
PTZ Set...: Controls pan, tilt and zoom of the selected PTZ camera.
Disable Time Out: Continues displaying the popup screen when events are detected by
disabling the dwell time out.
Original Ratio: Displays the Map popup screen by matching its original aspect ratio.
Anti-Aliasing Screen: Enhances image display quality on the popup screen by smoothing stair
stepping (aliasing) effects in the enlarged image.
User Set...: Sets the msde of the current popup screens displayed on the monitor. For example,
the monitor displays the current popup screen with enough frames for 16 cameras when you
select 4x4
.
Event Off
Motion
The panel allows PTZ control while live monitoring a remote site.
NOTE: Refer to 4.1 Live Monitoring for more details.
Irregular
Alarm In
Video Loss
Alarm Out