Function Buttons - Revo R16DVR3 User Manual

User's Manual

Function Buttons

Disconnect: Disconnects the current connection on the Status View panel.
NOTE: If you want to connect to another site, disconnect from the currently connected system on the Status View
panel first by clicking the
Remote Setup: Allows changing the setup of the remote DVR connected to the Status View panel.
NOTE: Refer to the manual for each applicable remote DVR for more details on system setup.
Remote System Log: Displays the system log information of the remote DVR connected to the Status View panel.
Remote Event Log: Displays the event log information of the remote DVR connected to the Status panel.
NOTE: Refer to 3.3 Menu – Remote Menu for more details on the Remote System Log and Remote Event Log.
NOTE: When the remote site is not connected to the Status View panel, Remote Setup, Remote System Log and
Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on
the Remote Sites panel.
Remote Panic Control: Controls the panic recording of the remote DVR connected to the Status View panel. The
(On) button indicates that the remote DVR is not in the panic recording mode and you can start panic recording
by clicking the button. The
can stop panic recording by clicking the button.
Status Display Window
The Status Display Window displays the event, alarm out, system check, and recording status information of the remote
system connected to the Status View panel in real-time.
NOTE: Depending on the specifications of the remote DVR, status display may not be supported.
Event: Displays events (Motion Detection, Alarm In, Video Blind). The status display of event detection will continue

during the preset dwell time of the event-driven recording.
Alarm Out: Displays status of the alarm-out signals.

Alarm-Out
System Check: Displays the function status of the camera, alarm, and recording.

Normal
Record From/To: Displays the record period.

Status: Displays the recording, playback, archiving, clip-copy status.

On
Version: Displays the system version information.

38
button.
(Off) button indicates that the remote DVR is in the panic recording mode and you
Event Detection
No Event Detection
Event Off
No Alarm-Out
Irregular
Off
Alarm-Out Off
System Check Off