Ptz Control Panel - Revo R4-8-16DVR2 User Manual

Table of Contents

User's Manual



x0.25 to x2: Sets the desired size of the Map popup screen.



Full Screen: Enters the full-screen mode of the Map popup screen.



Transparency...: Adjusts the transparency of the popup screen.



PTZ Set...: Controls pan, tilt and zoom of the selected PTZ camera.



Disable Time Out: Continues displaying the popup screen when events are detected by disabling

the dwell time out.



Original Ratio: Displays the Map popup screen by matching its original aspect ratio.



Anti-Aliasing Screen: Enhances image display quality on the popup screen by smoothing stair

stepping (aliasing) effects in the enlarged image.

User Set...: Sets the msde of the current popup screens displayed on the monitor. For example, the



monitor displays the current popup screen with enough frames for 16 cameras when you select 4x4

NOTE: Refer to Appendix – Map Editor, Device Setting section for more details about the popup

function.

To connect to the remote site, select the device you want to connect to from the Map panel and then drag and drop it in

the desired position on the screen or the Status View panel. Also, placing the mouse cursor on the device on the map

displays the device status. When the device detects any event or the device is not working properly, the following status

icons appear (maximum of 4).

Unplugged

Motion

NOTE: The device status is displayed as Irregular based on to the system check settings and as Video Loss,

Motion, Alarm In and/or Alarm Out according to the event detection settings on the remote DVR.

Clicking the right mouse button on the Map panel causes a text menu screen to display. Selecting Watch Event View

from the menu displays the event information of the connected remote sites. Selecting Close disconnects the current

connection on the Map panel.