Revo R16DVR3 User Manual page 26

User's Manual
Setting up the Basic Schedule Mode...
 Resolution: Set the recorded image resolution for the selected recoding mode.
 Dwell: Set the length of time you would like to record for the selected recoding mode.
Setting up the Advanced Schedule Mode...
 Pre-Event Record: Selecting Setup... allows you to set up the
pre-event recording by setting the ips, Quality, Resolution and
Dwell for each selected camera channel.
 Post-Event Record Dwell: Set the length of time you would like to record for the associated event.
 Add Schedule...: Adds a schedule item. Up to 20 schedules can be registered.
No. – Indicates a schedule number. The higher the number, the higher its priority.
Day – Select the days that the recording will take place.
Range – Set the time range that the recording will take place.
Mode – Select the recording mode. ( : Time (Time-lapse) recording,
Channels – Select which cameras will be recorded.
Settings – Set the ips, Quality and Dwell of the recording for the selected recording mode in the Mode column. If you do
not set the Settings column, the DVR will follow the default settings. See below for details.
– Deletes the recording settings.
20
 Schedule Type: Select the Basic schedule mode.
 Record Schedule: Select the time range that the scheduled
recording will take place.
 Mode: Select the desired recording mode. ( : Time (Time-
lapse) recording, yellow
Post-Event recording,
recording, yellow
& red
Event recording)
 ips: Set the images per second for the selected recoding
mode.
 Quality: Set the recorded image quality for the selected
recoding mode.
 Schedule Type: Select the Advanced schedule mode.
: Event recording,
: Pre-Event recording, red
: Time & Post-Event
& red
: Pre-Event recording & Post-
: Time & Event recording)
: