Revo R16DVR3 User Manual page 97

Popup Dwell Time: Select Popup Dwell Time... in the Option menu to set the duration of the Map popup screen
displayed when events are detected, and the following Popup Dwell Time window appears.
Status Color Setting: Select the Status Color Setting... in the Option menu and the following Status Color window
appears. You can set the device to display a unique color reflecting its status on the Map panel.
Name Table: Select Name Table... in the Option menu to display the name instead of the IP address of the DVR
on the Map panel, and the following Name Table setup window appears.
Click the Add button, and the following Site Item box appears.
Check the box beside Use Timeout and adjust the time out dwell from 1 second to
5 minutes. Selecting Display remaining time displays the remaining time out dwell
on the Map popup screen.
NOTE: Popup Dwell Time will be applied to all maps displayed on the map panel.
Check the box beside Color Use and select each status box to use. Click each selected status
box and select the desired color. When done, click the OK button.
 Unplugged: Either connection to the remote site has failed, or Device No. for the device is not
supported by the remote site.
 Event off: Event detection function is not set up.
 Irregular: The device is not working properly.
 Video Blind/Video Loss/Motion: The event is detected.
 Alarm In: Alarm in is detected.
 Alarm Out: Alarm out is detected.
NOTE: Devices are displayed as Irregular based on the system check settings and as Video
Loss, Motion, Alarm In, and Alarm Out based on the event detection settings on the remote
DVR.
NOTE: The device displays mixed color when detecting more than two statuses at the same
time.
REVO Remote Pro (Remote Administration System)

Remote Site Setup: Enter the site name and IP address of the DVR
connected to the devices you want to include on the map. Click the Port...
button and enter the network IP port number (8000 to 12000) that matches
the value set during the LAN setup on the DVR. Check the box beside
Use DVRNS to use the DVR name service.
NOTE: If you use DVR Name Service, you can enter the name
registered on the DVRNS server instead of the IP address of the DVR,
and you do not need to enter the network IP port number.

Login Setup: Enter the user ID and password for the DVR associated
with devices.

DVRNS Server: Enter the IP address and port number (10000 to 12000)
of the DVRNS server, which matches the values set during the DVRNS
setup on the DVR.
Clicking the OK button saves the setting.
43