Playback And Search; Ptz Control; Color Control; Alarm Out Control - Revo R16DVR3 User Manual

User's Manual
Sequence Monitoring
Clicking the button on the toolbar and selecting a desired Auto Sequencing group connects to the registered sites
sequentially allowing connection to more than one remote site and displays images from selected cameras. Clicking the
button during sequence monitoring releases sequence monitoring and maintains the current connection. For sequence
monitoring to function, the sequence sites should be registered during System setup. Refer to 3.3 Menu – System Menu
for details on configuring the sequence site.
NOTE: While in the sequence monitoring mode, you cannot manually connect to sites by dragging and dropping
with the mouse.

PTZ Control

Color Control

Alarm Out Control

4.2 PLAYBACK AND SEARCH

REVO Remote Pro allows you to play back and search recorded images on remote DVRs. It also provides additional
functions including zoom, various image enhancements, image saving and image printing. To use remote playback
and search functions, the display option must be set to of Search Screen or Watch and Search Screen during System
setup.
To connect a remote site on the Search screen, select the site or camera you want to connect to in the Remote Site or
Favorite Sites panel and then drag and drop it in the desired position on the screen. The
Search screen. The remote site connection on the Search screen will automatically be disconnected if there is no activity
for a specified amount of time. Click the
menu to disconnect the current connection manually.
30
Select a PTZ camera at the remote site, and control pan, tilt and zoom. Only
the administrator can control PTZ at REVO Remote Pro. The
display on each camera screen when PTZ can be controlled remotely.
NOTE: Control features of the Advanced menu will be enabled when a
camera connected to a DVR supports PTZ features such as Speed, Auto
Pan, Tour, etc. and the DVR supports remote PTZ control. Depending
on the specifications of the PTZ camera, some features of the Advanced
menu may not be active.
NOTE: Using the mouse for PTZ control is supported. Click the left
mouse button on the image and move that image in the direction you
want to by dragging the mouse. Use the mouse wheel to zoom in and
out.
Adjust the brightness, contrast, saturation and hue of live video for each camera by
clicking the target icons on the Color Control panel. Clicking the
image processing operation and reloads the original image. Only the administrator can
adjust the image at REVO Remote Pro.
NOTE: It is important that cameras are properly adjusted. These adjustments cannot
make up for improperly adjusted cameras when the images are recorded.
Control alarm out devices on the remote DVRs by clicking the ON or OFF buttons. Only the
administrator can control an alarm out at REVO Remote Pro.
button on the toolbar or select Disconnect from the System drop-down
icon will
icon cancels the
icon will be displayed on each