Appendix; Error Code Notices; Troubleshooting - Revo R16DVR3 User Manual

Appendix

ERROR CODE NOTICES

SYSTEM UPGRADE RELATED
No.
0 Unknown error.
1 File version error.
2 Operating system version error.
3 Software version error.
4 Kernel version error.
100 Upgrade device mounting failed.
101 Package is not found.
102 Extracting package failed.
103 LILO failed.
104 Rebooting failed.
105 Invalid package.
300 Remote connection failed.
301 Remote network error.
302 Remote upgrade is not authorized.
303 Saving remote package failed.
304 Remote upgrade is cancelled by the user.
400 USB device mounting failed.
401 Reading upgrade package on the USB device failed.
402 Copying upgrade package on the USB device failed.
500 System is busy clip copying.

TROUBLESHOOTING

PROBLEM
No Power
No Live Video
DVR has stopped recording.
The icon displays, however,
the DVR is not recording.
IR remote control does not
work properly.
Description
 Check power cord connections.
Confirm that there is power at the outlet.

Check camera video cable and connections.

 Check monitor video cable and connections.
Confirm that the camera has power.

Check camera lens settings.

If hard disk drive is full, you will either need to delete video or set the DVR to the Recycle
On (Recycle When Disk Full) Mode. See Chapter 2 – Installation & Configuration,
Advanced Setup – Record Setup for details.
When the DVR is in the Pre-Event recording mode, the yellow
when there is no event, and the DVR is not recording. The red
when any event occurs and the DVR starts recording.
Check the batteries in the remote control.

Check that nothing blocks the infrared sensor on the DVR.

Check the system ID setting for the remote control. See Chapter 2 – Installation &

Configuration, Advanced Setup – System Setup for details.
16 Channel Digital Video Recorder
BACKUP RELATED
No.
0 Unknown error.
1 Device error.
2 Mounting failed.
5 File already existed.
6 Not enough space.
7 Creating temporary file failed.
8 Opening disk failed.
9 Formatting disk failed.
10 Database has been changed.
11 Appending failed.
12 Bad sector.
13 No executable file.
14 Opening executable file failed.
15 Writing executable file failed.
16 Creating image failed.
POSSIBLE SOLUTION
Description
and icons display
and icons display
41