Panic Recording; Status View - Revo R16DVR3 User Manual

4.4 PANIC RECORDING

Clicking the button on the toolbar starts panic recording of cameras currently displayed on the Watch screen. Clicking
the button again stops panic recording. Up to 16 channels can be recorded at a time, and you can select which cameras
are to be recorded during the System setup. Clicking the
and plays video saved in the recording folder designated during the System setup. The Record Player GUI and its controls
are almost identical to the REVO Backup. Refer to Appendix – Reviewing Video Clips.
If you want to play back video saved in another recording folder, run the Record Player program first. Move to the Start
menu in Windows. Then, select RecordPlayer from the REVO Remote Pro options and select the recoding folder
path you want.
Recorded video can be saved as a bitmap or as an executable file using the save function of the Record Player.
NOTE: Panic recording will be available only if you select Use Recording and it is set up in the recording options
during the System setup.
NOTE: The date and time displayed on the Record Player indicates when the recording was made on REVO
Remote Pro.
NOTE: The icon will display on each screen when panic recording starts.
NOTE: Audio recording is not supported.

4.5 STATUS VIEW

REVO Remote Pro provides a status display, remote setup, system log and event
log view of the connected remote site in real-time. To display the status of the remote
site, select a camera or a site from the Remote Site list and drag it to the Status View
panel. You can also select Connect Status from the popup menu displayed by
clicking the right mouse button after selecting the site from the Remote Site list.
REVO Remote Pro (Remote Administration System)
button on the toolbar initiates the Record Player program
37