Quick Setup Wizard - Revo R16DVR3 User Manual

NOTE: For simplicity, most of the operation explanations in this manual are based on using the Remote Control.
While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.

QUICK SETUP WIZARD

When you turn the system on for the first time, the Quick Setup Wizard will run. The Quick Setup Wizard guides you
to configure the system for basic operation. The wizard also can be accessed by selecting Quick Setup in the Main
Setup screen. Refer to the following Advanced Setup section.
Use the arrow buttons on the remote control to highlight the character you want
in the name or title and press the
and the cursor moves to the next position. Selecting
and lower case keyboards,
can use up to 31 characters including spaces in your title.
Select the Next button to start the Quick Setup Wizard.
NOTE: Selecting the Cancel button throughout the screens
exits the Quick Setup Wizard without saving your changes and
return to the Live Monitoring mode.
Date/Time Setup
 Date: Set the system date and select the date format.
 Time: Set the system time and select the time format.
 Time Zone: Select your time zone.
 Use Daylight Saving Time: Selecting the box sets the system
to use daylight saving time.
NOTE: The Date/Time will be set, and the clock will start when
you click the Next button.
Record Method Setup
 Select the desired recording mode from:
– Motion Event Record (Recommended)
– Continuous & Motion Event Record
– Continuous Record
NOTE: You should understand each recording mode before
selecting the DVR's recording method.
16 Channel Digital Video Recorder
button. That character appears in the title bar
backspaces, and deletes entered characters. You
toggles between the upper
9