Revo R16DVR3 User Manual page 17

LAN Setup
Select the desired network configuration between Auto
Configuration and Manual Configuration, and then select the
Test button to test the network configuration you set.
NOTE: Selecting Auto Configuration allows the DVR to obtain
LAN parameters (IP address, Gateway, Subnet Mask and DNS
Server address) automatically. Selecting Manual Configuration
allows you to set up LAN parameters manually.
NOTE: The network configuration you set should be tested by
selecting Test, otherwise the Next button will not be selected
so that you cannot move to the next step.
 Use DSL/PPPoE Setup: Selecting the box allows you to set
up the DSL network. Entering the ID and password for DSL
connection will be required.
REVO Dashboard Setup I
Select the Next button to start the Dashboard Setup.
REVO Dashboard Setup II
Select New account if you want to create a new Dashboard account,
and select Existing account if you want to use your existing
Dashboard account.
REVO Dashboard Setup III
Enter the User ID and Password for your Dashboard account. And
then register the DVR you want to access by entering the DVR
name and selecting the Register/Add a new DVR button.
16 Channel Digital Video Recorder
11