Chapter 4 - Operation; Live Monitoring - Revo R16DVR3 User Manual

Chapter 4 — Operation

4.1 LIVE MONITORING

REVO Remote Pro provides remote monitoring functions for viewing video images in real time from either a single
site or multiple sites. In addition, when events are detected at a remote site while in the live monitoring mode, REVO
Remote Pro displays the event information on the Watch Event View panel. In order to perform live monitoring, the
display option must be set to Watch Screen or Watch and Search Screen during System setup.
To connect a remote site on the Watch screen, select the site or camera you want to connect to in the Remote Site, Favorite
Sites or Map panel and then drag and drop it in the desired position on the screen. The
Watch screen. To disconnect the current connection, select the site or camera you want to disconnect to in the Remote
Sites, Favorite Sites or Map panel or on the screen and then click the
the System drop-down menu.
NOTE: When selecting the display option of Watch and Search Screen during System setup,
the remote site can also be set to connect using the right or left mouse buttons (This is
user-defined and must be set during System setup). Select Watch Screen to connect to
the selected site on the Watch screen when the text menu screen appears.
Screen Layout and Frame Layout
REVO Remote Pro provides multiple screen layout options. The formats available are single-screen, quad, 1+7, 3x3,
4x4, 5x5, 1+32, 6x6, 7x7, 8x8 and full-screen. When in one of the multi-view formats, clicking the
will move to the previous or next page. To view a specific image in the single-screen mode, move the cursor to that
image and double click the left mouse button. To return to the previous screen mode from the single-screen mode,
double click the left mouse button in the monitoring window.
Clicking (Layout Load) will apply the selected frame layout to REVO Remote Pro, and clicking
allows you to set up the user-defined frame layout.
Audio Communication
REVO Remote Pro supports audio communication between the REVO Remote Pro system and a DVR location equipped
with two-way audio. The
with the remote site, select any camera of the remote site on the screen and click the right mouse button. Selecting
Enable Audio from the menu displays the following audio control panel.
If you want to send audio to the selected remote site, click the
monitor live audio from the selected remote site through the attached speaker, click the
button and button allows two-way communication. Clicking the
If the remote DVR allows you to select an audio channel to monitor from the REVO Remote
Pro system, clicking the
camera channel associated with an audio channel to monitor and click the OK button.
icon will be displayed on each camera screen. If you want to enable audio communication
button displays the Select Audio Channel dialog box. Select a
REVO Remote Pro (Remote Administration System)
icon will be displayed on each
button on the toolbar or select Disconnect from
button and talk into the microphone. If you want to
button disables audio communication.
or button
(Layout Setup)
button. Clicking both
29