Advanced Setup - Revo R16DVR3 User Manual

User's Manual

ADVANCED SETUP

To enter the Main Setup screen, press the MENU button on the remote control. Select the
of the screen by pressing the
NOTE: Setting up a password is strongly recommended to ensure secure management of the system.
NOTE: To enter a password by using the mouse, click the
instructions above for using the virtual keyboard.
NOTE: Selecting Quick Setup or Network Setup in the Main Setup screen runs the selected setup wizard. Refer
to the previous Quick Setup Wizard section for information regarding the Quick Setup and Network Setup.
Selecting Advanced Setup in the Main Setup screen displays the following Advanced Setup screen, and gives you
to access to all the DVR's setup screens. Your DVR can be set up using various screens and dialog boxes.
Throughout the screens you will see
the opportunity to reset that screen to its default settings. You can save your changes by selecting the Save button and
button. Selecting the Cancel button exits the screen without saving the changes.
pressing the
12
Select the Finish button to finish the Setup Wizard.
button. The Login screen appears.
Enter the password by pressing the appropriate combination of Camera number buttons
on the remote control and select the OK button. There is no default password when
logging in for the first time.
. Selecting the
button, and a virtual keyboard displays. See
and pressing the button on the remote control gives you
(Setup) icon at the top