Revo R16DVR3 User Manual page 101

5. When the following dialog box appears, select OK to complete the installation.
6. After installing the REVO Mobile software, the program will be installed on the My Device\Program Files\REVO
Mobile 3.1.0 folder, and you will find the REVO Mobile icon
My Device\Program Files\REVO Mobile 3.1.0\REVO Mobile.exe file.
NOTE: To remove the program, select Start on the Task Bar on the PDA. Go to Settings → System → Control panel
→ Add/Delete programs → [DVR] REVO Mobile 3.1.0 in order. Clicking the Delete button uninstalls the program.
Configuration and Operation
The Graphical User Interface (GUI) of the REVO Mobile is as shown below, and the description of each menu buttons
follows.
① Monitoring Screen: Displays live video images from the cameras at the remote site.
② Status Information: Displays REVO Mobile version information and the status information about the remote site
connection.
③ Menu Buttons: Performs REVO Mobile functions.
Connection
PTZ Control
Connection: Click the button to perform remote site management, DVRNS settings and remote connection.
 Add...: Click the button to add the remote site.
Camera
Alarm out Control
 Change...: Select the site you want to change and click the Change... button, and then edit
the site information.
 Remove: Select the site you want to remove and click the Remove button.
 DVRNS...: Click the DVRNS... button to set up the DVRNS function and the DVR Name
Service screen is displayed. Enter the DVRNS server's IP address and port number. The
IP address and port number you enter should match the values set during the DVRNS setup
on the remote DVR you want to connect to.
 Connect: Select the site you want to connect to and click the Connect button. Once you
connect to the remote site, the live video of camera 1 displays. If the connection fails, the
error message will be displayed in the Status Information box.
– Site Name: Enter a site name. Up to 32 characters may be used for the site names.
– IP Address: Enter the IP address of the remote site.
– Watch Port: Set up the port number of the Watch program. The IP port number of Watch
Port should match the value set during the network setup of the remote DVR.
– Use DVRNS: Select whether or not to use the DVRNS function. When using the DVRNS
function, you can enter the remote site's name registered on the DVRNS server instead of
its IP address in the IP Address box. The name you enter should match the name set during
the DVRNS setup on the remote DVR.
– User ID / Password: Enter the user ID and password of the remote site to be accessed. If
you have entered a user ID and a password, the site will be connected automatically. Up to
32 characters may be used for the user IDs, and up to 10 characters may be used for passwords.
REVO Remote Pro (Remote Administration System)
on the desktop. Double click the icon or run the
Screen Mode
Disconnection
Image Adjustment
47