Record Table Search - Revo R16DVR3 User Manual

Record Table Search

Standard View
Compact View
Recording information about video images currently displayed on the screen displays in the recording status bar. A
grey vertical line indicates the current search position. To search for specific video, move the vertical line by pressing
the Left or Right arrow buttons on the remote control, scrolling the mouse wheel or clicking the mouse on the desired
segment.
If the DVR's time and date have been reset to a time that is earlier than some recorded video, it is possible for the DVR
to have more than one video stream in the same time range. In this case, the overlapping time range in the record table
will be separated by a yellow vertical line.
NOTE: The recorded data in the time range located to the right of the yellow vertical line is the latest.
There are three view modes; Standard view, Expanded view and Compact view. Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view mode,
selecting the icon located at the bottom switches to the Expanded view mode. The Expanded view displays the
recording information of each camera channel currently displayed on the screen. Selecting the
Compact view mode which displays only the toolbar. Selecting the
Standard view mode, and selecting the
Selecting or located at the bottom zooms the record table. Selecting
selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the current
record table screen, select the arrows located at the end of the times by using the arrow buttons on the remote control.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic  Pre-Event  Event  Time.
The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event, Purple for Event,
and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen.
icon in the Expanded view mode switches to the Standard view mode.
Days with recorded video display on the calendar with white numbers. You can
select the days with recorded video by using the arrow buttons on the remote
control. Selecting the Display when entering Search Mode box will display
the Calendar Search screen whenever entering the Search mode. Once you have
selected a day, pressing the
selected date on the screen. Once you have selected the date you want to search,
review the surrounding video by using the playback controls located at the bottom.
Refer to the Recording Video – Playing Recorded Video section of this chapter
for information regarding playback controls.
16 Channel Digital Video Recorder
Expanded View
icon in the Compact view mode switches to the
displays eight hours (1-minute based), and
button displays the first recorded image of the
icon switches to the
33