Device Setting - Revo R16DVR3 User Manual

User's Manual

Device Setting

Selecting the , , or
Bar. Select the icons, and drag and drop them at the desired locations on the background image.
Go to the Property [Camera/AlarmOut/AlarmIn] tab and set the device information.
Equipment
 IP Address/User/Password/Port: Each field is filled in automatically with the information (user ID, password, and port
number) set in Site Information Setting..., or you can enter it manually.
 Device No.: Set the device number (1 ~ 16) for each device. If the selected device is a camera, Device No. changes to
Camera No..
 DVRNS Use: Select Yes to use DVR Name Service, and the DVRNS field appears. Enter the IP address (or domain name)
and the port number of the DVRNS server, and the name of the DVR registered on the DVRNS server.
NOTE: You should not select numbers that are not supported for devices on the remote DVR when selecting
Device No. Otherwise, the map cannot detect the device and it displays the device status as Unplugged. For
example, Device No. should be from 1 to 16 when the device is connected to a 16-channel DVR.
NOTE: If you set the IP address and port number of the DVRNS server in Site Information Setting..., the DVRNS
fields are filled with the information automatically.
NOTE: The DVRNS function is supported only with the devices associated with a DVR providing the DVRNS (DVR
Name Service) function.
Go to the Event [Camera/AlarmOut/AlarmIn] tab and set the option for the devices.
44
Click the Display Name field of each IP address and enter the name of the DVR
to display on the popup screen.
buttons on the toolbar displays the Camera, AlarmOut and AlarmIn tabs under the Image
General
 Name: Enter a device name.
 Description: Enter description of the device.
 Site Information: Select a proper site for the device in the list, and the Equipment fields
(User, Password, IP Address and Port) are filled automatically with the information set
in Site Information Setting....
 Image: Select an image of a device.
 Ratio: Adjust the size of the device image.
 X Coordinates/Y Coordinates: Adjust the position of the device image by clicking each
field and changing the numbers.
 Horizontal/Vertical: Adjust the size of the device image by clicking each field and changing
the numbers.
 Popup camera: If the selected device is an alarm-in device, you can associate a camera
with the sensor by entering the camera name. The camera name you enter should be the
same as the camera name entered under the Property [Camera] tab. The Map panel pops
up another screen and displays images of the camera associated with the sensor on the popup
screen when an alarm-in event occurs.
 Event [Camera]: Selecting an event from a drop-down list and checking the Watch View
Popup box set the Map panel to pop up another screen when an event occurs. Selecting Click
from a drop-down list and checking the Watch View Popup box pops up another screen by
clicking the mouse button on the camera icon on the Map panel regardless of event detection.