Appendix; Error Code Notices; Troubleshooting - Revo Digital video recorder User Manual

Appendix

ERROR CODE NOTICES

SYSTEM UPGRADE RELATED
No.
Unknown error.
0
File version error.
1
Operating system version error.
2
Software version error.
3
Kernel version error.
4
Upgrade device mounting failed.
100
Package is not found.
101
Extracting package failed.
102
LILO failed.
103
Rebooting failed.
104
Invalid package.
105
Remote connection failed.
300
Remote network error.
301
Remote upgrade is not authorized.
302
Saving remote package failed.
303
Remote upgrade is cancelled by the user.
304
USB device mounting failed.
400
Reading upgrade package on the USB device failed.
401
Copying upgrade package on the USB device failed.
402
System is busy clip copying.
500

TROUBLESHOOTING

PROBLEM
No Power
No Live Video
DVR has stopped recording.
The icon displays, however,
the DVR is not recording.
IR remote control does not
work properly.
While upgrading the system, the
DVR keeps rebooting and the
upgrade fails.
Description
Check power cord connections.

Confirm that there is power at the outlet.

Check camera video cable and connections.

Check monitor video cable and connections.

Confirm that the camera has power.

Check camera lens settings.

If hard disk drive is full, you will either need to delete video or set the DVR to the Recycle
On (Recycle When Disk Full) Mode. See Chapter 2 – Installation & Configuration,
Advanced Setup – Record Setup for details.
When the DVR is in the Pre-Event recording mode, the yellow
when there is no event, and the DVR is not recording. The red
when any event occurs and the DVR starts recording.
Check the batteries in the remote control.

Check that nothing blocks the infrared sensor on the DVR.

Check the system ID setting for the remote control. See Chapter 2 – Installation &

Configuration, Advanced Setup – System Setup for details.
If the current system version is higher than the upgrade package file version, you should
reset the DVR first using the Factory Reset. When using the Factory Reset, you will lose
any settings you have saved.
16 Channel Digital Video Recorder
BACKUP RELATED
No.
Unknown error.
0
Device error.
1
Mounting failed.
2
File already existed.
5
Not enough space.
6
Creating temporary file failed.
7
Opening disk failed.
8
Formatting disk failed.
9
Database has been changed.
10
Appending failed.
11
Bad sector.
12
No executable file.
13
Opening executable file failed.
14
Writing executable file failed.
15
Creating image failed.
16
POSSIBLE SOLUTION
Description
and icons display
and icons display
45