Record Table Search; Figure 44: Record Table Search Screen - Revo R16DVR5 User Manual

Once you set your desired search conditions, highlight Search and press the
the Event Log Search screen. Selecting Cancel exits the screen without saving the changes.

Record Table Search

Recording information about video images currently displayed on the screen displays on the recording status bar. A
grey vertical line indicates the current search position. To search specific video, move the vertical line by using the
Left or Right arrow buttons on the remote control or by clicking the mouse on the desired segment.
If the DVR's time and date have been reset to a time that is earlier than some recorded video, it is possible for the
DVR to have more than one video stream in the same time range. In this case, the overlapping time range in the
record table will be separated by a yellow vertical line .
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view
mode, selecting the icon located at the bottom switches to the Expanded view mode. The Expanded view displays
the recording information of each camera channel currently displayed on the screen. Selecting the
Standard view mode switches to the Compact view mode which displays only the toolbar. Selecting the
the Compact view mode switches to the Standard view mode, and selecting the
switches to the Standard view mode.
Selecting or located at the bottom zooms the record table. Selecting
1920x1080 resolution) (1-minute based), and selecting
earlier or later times that are not shown in the current record table screen, select the arrows located at the end of the
times by using the arrow buttons on the remote control.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic  Pre-Event  Event
 Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event,
Purple for Event, and Blue for Time.
< Compact View >
< Standard View >
< Expanded View >

Figure 44: Record Table Search screen.

displays 24 hours (3-minute based) at once. To move to
Digital Video Recorder
button to display the search results in
icon in the
icon in the Expanded view mode
displays eight hours (12 hours with
icon in
65