Proximity Sensor Module - Omron CQM1H series Operation Manual

Nomenclature
Indicators

2-1-5 Proximity Sensor Module

E2C-MA11
Front View
Sensor code connection terminals (Refer to
3-4-3 E2C-MA11 Proximity Sensor Module
for details.)
Indicators
Name
OPE
STAB
Note When the mode selector is set to SET, the operation indicator and stability op-
eration indicator are used to monitor teaching. Refer to 2-2 Switch Settings for
details.
Side View
Stability operation indicator (green)
Teaching button
Name
OPE
STAB
Color
Orange Lit when the control output is ON.
Green Lit during stable light ON or dark ON, which can
be selected with the operation mode selector.
Operation mode selector
L ⋅ on:
Light ON
D ⋅ on:
Dark ON
(Refer to 2-2 Switch Set-
tings for details)
Operation indicator
(orange)
Mode selector (SET for teaching and RUN for normal opera-
tion) (Refer to 2-2-2 E2C-MA11 Proximity Sensor Module for
details.)
Color
Orange Lit when the control output is ON.
Green The stability operation indicator shows the stability
of detecting or non-detecting operations. The
stability operation indicator will be lit when a
sensing object is located 0.93 times as near as
the sensing distance or less. The stability
operation indicator will be also lit when a sensing
object is located 1.07 times as far as the sensing
distance or more.
Section 2-1
Function
Timer selector
0 ms: No timer
10 ms: OFF-delay timer
(Refer to 2-2 Switch Set-
tings for details)
Function
133