Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Omron SC21
Summary of Contents for Omron SC21
- Page 1 Network Card SC21 Manual (Setup Guide)
- Page 2 Introduction Thank you for purchasing the OMRON “Network card SC21” (this product hereafter). This document contains the information you need for using safely this product. Please read carefully before installation and use. About Disclaimers We may not respond to the compensation for any damages even if they are caused by the use of our products, including the abnormalities and failures of the equipment, connection devices, and software.
-
Page 3: Safety Precautions
Safety Precautions The following describes important for safe use in combination with our uninterruptible power supply (UPS). Safety Please read carefully before installing or using the unit. Precautions Also, please read the instruction manual of the UPS before installing or starting to use it. ●... - Page 4 When attaching and removing this product, always turn OFF the power switch of the UPS and connected device, and disconnect the AC input plug from the wall. ● Not doing so may cause a failure of the UPS, This Product and connected device.
-
Page 5: About Disposal Of This Product
If you notice abnormal sound or smell or smoke, immediately turn off the power switch of the connected UPS and disconnect the AC input plug from a wall outlet. ● If you notice such a condition, stop using the unit and contact the shop of purchase or our company for inspection and repairs. -
Page 6: Table Of Contents
CONTENTS Introduction ........................i Safety Precautions ....................... ii About disposal of this product ..................iv CONTENTS ........................v About this product ......................1 Enclosed items ......................1 Names and functions of parts ..................1 Supported models, software ..................2 For compatible UPS ....................2 Recommended web browser ................. -
Page 7: About This Product
Please check whether there is any damage in the appearance of this product, or all the accessories are included. When a packing article has faults and shortage, please ask the store where you purchased it. SC21 USB cable Serial number... -
Page 8: Supported Models, Software
Supported models, software For compatible UPS Please check our product page. Recommended web browser Microsoft Edge／Internet Explorer 11 Google Chrome Safari Firefox Supported wireless LAN adapter EW-7811Un made by EDIMAX Operation confirmed USB memories RUF3-AL032G made by BUFFALO GH-UF3TA32G made by GREEN HOUSE... -
Page 9: Attaching To A Ups
Attaching to a UPS Attach this product to the card slot behind a UPS. Since the position of the card slot differs for each model, refer to the UPS instruction manual for details. When you perform insertion and removal of this product, be sure to turn off a UPS pull out "AC input"... -
Page 10: Network Setting
③ Fix this product with two screws that are removed. ※BN150XR is fixed with one screw. ※Store the cover that is removed not to be lost. Network Setting In this product, the IP address is fixed. Change the setting according to the environment. Network Setting (Initial Value) IPv4 IP Address... -
Page 11: Changing With Terminal Soft
Changing with terminal soft Connect the computer by an accessory USB cable and change the setting with terminal soft. This document explains using with a computer (OS: Windows 10) and terminal soft “Tera Term.” ① Connect this product USB Port (Mini-B) to a computer (OS: Windows 10) by an accessory USB cable. - Page 12 ⑤ After the terminal window is opened, push <Enter> key and enter a username and password following the window. (Initial Value) Username OMRON Password admin ⑥ Select “SNMP/WEB Card Settings” of “1” and press the <Enter> key. ⑦ Select “IP, Time and System Group” of “1” and press the <Enter> key.
- Page 13 ⑨ Select “IP Address” of “1” and press the <Enter> key, and enter the IP address for this product and press the <Enter> key. ※ Change a gateway (2.Gateway Address) and subnet mask (3.Network Subnet) too by the same procedure as IP address. ⑩...
-
Page 14: Changing With Telnet
Changing with Telnet Connect a computer and this product with a LAN cable and change the settings with Telnet. After setting the network setting of the computer to this product, change the network setting of this product. When Telnet is not enabled in your Windows, see “Enabling Telnet” on page 13 to make it enabled. - Page 15 ③ Right-click the Ethernet to select [Properties]. When there are several Ethernet icons, right-click the network icon which connected this product. ④ Select “Internet Protocol Version 4 (TCP/IPv4)” and click [Properties].
-
Page 16: Changing Network Settings Of This Product With Telnet
Telnet 192.168.2.150 ③ After screen shows “Please Enter User Name:", Login with the following username and password. (Initial Value) Username OMRON Password admin ※For the operation after login, see the procedure 6-10 in “Changing with terminal soft” on page 5. -
Page 17: Web Monitor
② Click the [Login] button in the Web monitor window. ③ Enter the username and password in the login window and click “Log in.” (Initial Value) Username OMRON Password admin The username and password can be changed in [Card management] ->... -
Page 18: How To Logout
④ The Web monitor window opens. ※Some screen notation may be different depending on the firmware version. How to logout Click the [Logout] button. Then, the setup of this product is completed. For the details, see “SC21 User's Manual.”... -
Page 19: Enabling Telnet
Enabling Telnet By default, Telnet has not enabled in Windows10. Take the following procedure to make it enabled. ① Select [Start] -> [Windows System] -> [Control Panel]. ② Change [View by] to [Small icons] and select [Programs and Features]. ③ Select [Turn Windows features on or off] on the left side on the window. ④... -
Page 20: Confirm The Usb Serial Port
Confirm the USB serial port. ■ In case of Windows10. ① Select [Start] -> [Settings]. ② Enter “device manager” at “search” field to search, and click the device manager displayed. ③ If “ELMO GMAS(COM*)” or “USB Serial Device (COM*)”is displayed in “port (COM and LPT), it means being recognized normally. -
Page 21: When A Ups Serial Port Is Not Recognized Normally
■ When a UPS serial port is not recognized normally, After connecting a USB cable to a computer, if the above message appears and it is not recognized, try the following procedure. ① Press the restart button of this product with a tip of a clip and wait 30 seconds. ※Restart time of this product is about 30 seconds. -
Page 22: Specifications
Also, do not connect USB devices that require a current exceeding 100mA. Mini-B (for console setting) Protocol SNMP, HTTP, HTTPS, SSH, Telnet, ICMP, SMTP etc. SWC2 (original: for SC21) UPS MIB (RFC1628) Usage environment -10 to 55 degrees Celsius / 10 to 90% RH temperature/humidity... - Page 24 K1C-X-180443D...