Omron CQM1H series Operation Manual page 147

Connecting Devices
1-3-2 Remote Console
1-3-3 Sensor Modules
1-3-4 Applicable Sensors
Use the mode setting selector of the dedicated CQM1-TU001 Remote Console
for the CQM1-SEN01 to set sensor modules mounted to the CQM1-SEN01 to
operation monitor mode or teaching mode.
The following dedicated sensor modules can be mounted to the CQM1-SEN01.
Optical Fiber Photoelectric Module
Photoelectric Module
Proximity Sensor Module
Dummy Module
Note Mount the E39-M11 Dummy Module to any unused slot of the CQM1-SEN01 for
dust prevention.
The following sensors can be used with the E3X-MA11 Optical Fiber Photoelec-
tric Module.
Sensing method
Thru-beam
Side view thru-beam
Heat-resistive thru-beam
Screen thru-beam
Reflective
Side view reflective
Heat-resistive reflective
Retroreflective
Note The E3X-MA11 can be used with a variety of sensors in addition to those listed
above. The E3X-MA11, however, cannot be used with the E32-DC9G,
E32-DC9G4, E32-D61, or E32-D73.
The following sensors can be used with the E3C-MA11 Photoelectric Module.
Sensing method
Thru-beam
Diffuse reflective
Convergent reflective
Mark detection reflective
The following sensors can be used with the E2C-MA11 Proximity Sensor Module.
• E2C-CR5B
• E2C-CR8A
• E2C-CR8B
Name
E32-T11L, E32-TC200, and E32-T11
E32-T14L
E32-T51
E32-T16
E32-D11L, E32-DC200, and E32-D11
E32-D14L
E32-D51
E32-R21
E3C-S10, E3C-1, and E3C-2
E3C-DS5W, E3C-DS10
E3C-LS3R
E3C-VS1G, E3C-VS3R, E3C-VM35R,
and E3C-VS7R
Section 1-3
Model
E3X-MA11
E3C-MA11
E2C-MA11
E39-M11
Model
Model
• E2C-X1A
• E2C-C1A
• E2C-X1R5A
127