H3C S3600 Series Installation Manual page 85

Hide thumbs Also See for S3600 Series:

Table of Contents

Installation Manual

H3C S3600 Series Ethernet Switches

Figure 5-3 <Disconnect> and <Call> buttons

Note:

After changing terminal's baud rate, you must disconnect and connect the terminal

emulation program to validate the new configuration.

Step 6: Press <Enter> to start program loading. The system displays the following

information:

Now please start transfer file with XMODEM protocol.

If you want to exit, Press <Ctrl+X>.

Loading ...CCCCCCCCCC

Step 7: Select [Transfer/Send File] in the HyperTerminal's window, and in the popup

dialog box similar to Figure 5-4 click <Browse>, select the software you need to

download, and set the protocol to XModem.

Figure 5-4 Send File dialog box

Step 8: Click <Send>. The system displays Figure 5-5.

Chapter 5 Loading Boot ROM and Host Software

5-9

Table of Contents