H3C S3600 Series Installation Manual page 74

Installation Manual
H3C S3600 Series Ethernet Switches
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Press <9>. The following information appears:
The current mode is fast startup mode!
Are you sure to change it to full startup mode? Yes or No(Y/N)
Make sure you already understand that it takes a relative long time for the system to
boot with full startup mode because it must perform some self-test operations.
Press <Y>. The following information appears:
Setting startup mode...done!
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Press <0>. The system reboots with full startup mode and displays the following
information:
Starting......
BOOT MENU
***********************************************************
*
* H3C S3600-28TP-SI BOOTROM, Version 320
*
***********************************************************
Copyright(c) 2004-2007 Hangzhou H3C Technologies Co., Ltd.
Creation date
CPU type
Chapter 4 Starting up the Switch at the Initial Boot
: Apr 10 2007, 11:27:16
: BCM4704
4-6
*
*
*