H3C S3600 Series Installation Manual page 32

Installation Manual
H3C S3600 Series Ethernet Switches
LED
10/100/1
000Base
-T Fabric
port LED
III. Attributes of the 100Base-X SFP ports
The S3600-28F-EI provides twenty-four 100Base-X SFP optical ports numbered from 1
to 24 on the front panel.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-11 lists the available 100Base-X SFP modules.
Mark Color
Green
Yellow
Speed
Flashing green
(3 Hz)
Flashing yellow
(3 Hz)
—
OFF
Green
Duplex
Flashing yellow
(3 Hz)
OFF
OFF
PoE
Flashing yellow
(3 Hz)
1-24
Chapter 1 Product Overview
Indicates
The port is connected, and the
ON
device is in an IRF loop fabric.
Data is being received/sent on
Flash
the port
The port is connected, and the
ON
device is in an IRF chain fabric.
Data is being received/sent on
Flash
the port
A fault occurs to the fabric.
The port fails POST.
The port is not connected.
The port is operating in full
ON
duplex mode
Data is being received/sent on
Flash
the port
The port fails POST.
The port is not connected.
No data is being received/sent
The port fails POST.