H3C S3600-28PSI System Description
H3C S3600-28PSI System Description

H3C S3600-28PSI System Description

S3600 series ethernet switches
Hide thumbs Also See for S3600-28PSI:
Table of Contents

Advertisement

Quick Links

System Description
H3C S3600 Series Ethernet Switches
Chapter 1 Product Overview ........................................................................................................ 1-1
1.1 Preface ............................................................................................................................... 1-1
1.2 System Features ................................................................................................................ 1-2
1.3 Service Features ................................................................................................................ 1-4
Chapter 2 Hardware Description .................................................................................................. 2-1
2.1 S3600-28P-SI Ethernet Switch .......................................................................................... 2-1
2.1.1 Appearance ............................................................................................................. 2-1
2.1.2 Console Port and LEDs ........................................................................................... 2-1
2.1.3 Attributes of the FE Ports ........................................................................................ 2-5
2.1.4 1000 Mbps SFP Port Attributes............................................................................... 2-5
2.1.5 Power Subsystem ................................................................................................... 2-6
2.1.6 Cooling Subsystem ................................................................................................. 2-6
2.2 S3600-28TP-SI Ethernet Switch ........................................................................................ 2-6
2.2.1 Appearance ............................................................................................................. 2-6
2.2.2 Console Port and LEDs ........................................................................................... 2-7
2.2.3 Attributes of the FE Ports ...................................................................................... 2-10
2.2.4 Attributes of 1000 Mbps SFP Ports ....................................................................... 2-11
2.2.5 Attributes of the GE Ports ..................................................................................... 2-11
2.2.6 Power Subsystem ................................................................................................. 2-12
2.2.7 Cooling Subsystem ............................................................................................... 2-12
2.3 S3600-52P-SI Ethernet Switch ........................................................................................ 2-12
2.3.1 Appearance ........................................................................................................... 2-12
2.3.2 Console Port and LEDs ......................................................................................... 2-13
2.3.3 Attributes of the FE Ports ...................................................................................... 2-13
2.3.4 Attributes of 1000 Mbps SFP Ports ....................................................................... 2-13
2.3.5 Power Subsystem ................................................................................................. 2-14
2.3.6 Cooling Subsystem ............................................................................................... 2-14
2.4 S3600-28P-EI Ethernet Switch ........................................................................................ 2-14
2.4.1 Appearance ........................................................................................................... 2-14
2.4.2 Console Port and LEDs ......................................................................................... 2-14
2.4.3 Attributes of the FE Ports ...................................................................................... 2-18
2.4.4 Attributes of 1000 Mbps SFP Ports ....................................................................... 2-18
2.4.5 Power Subsystem ................................................................................................. 2-19
2.4.6 Cooling Subsystem ............................................................................................... 2-19
2.5 S3600-28F-EI Ethernet Switch ........................................................................................ 2-19
2.5.1 Appearance ........................................................................................................... 2-19
2.5.2 Console port and LEDs ......................................................................................... 2-20

Table of Contents

i
Table of Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S3600-28PSI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for H3C S3600-28PSI

  • Page 1: Table Of Contents

    System Description H3C S3600 Series Ethernet Switches Table of Contents Table of Contents Chapter 1 Product Overview ......................1-1 1.1 Preface ..........................1-1 1.2 System Features ........................ 1-2 1.3 Service Features ........................ 1-4 Chapter 2 Hardware Description ....................2-1 2.1 S3600-28P-SI Ethernet Switch ..................2-1 2.1.1 Appearance ......................
  • Page 2 System Description H3C S3600 Series Ethernet Switches Table of Contents 2.5.3 Attributes of 100 Mbps SFP Ports ................. 2-24 2.5.4 Attributes of 1000 Mbps SFP Ports ............... 2-25 2.5.5 Attributes of the GE Ports ..................2-25 2.5.6 Power Subsystem ....................2-26 2.5.7 Cooling Subsystem ....................
  • Page 3 System Description H3C S3600 Series Ethernet Switches Table of Contents 2.10.6 PoE ........................2-45 2.10.7 Cooling Subsystem ..................... 2-45 Chapter 3 Software Features ......................3-1 3.1 Basic Features ........................3-1 3.1.1 Link Aggregation ..................... 3-1 3.1.2 Broadcast Suppression ................... 3-1 3.1.3 VLAN ........................
  • Page 4 System Description H3C S3600 Series Ethernet Switches Table of Contents 3.9 Security ..........................3-14 3.9.1 Terminal Access User Classification ..............3-14 3.9.2 SSH ........................3-14 3.9.3 Port Isolation ......................3-15 3.9.4 Packet Filter ......................3-15 3.9.5 IEEE 802.1X Authentication .................. 3-15 3.9.6 Centralized MAC Address Authentication .............
  • Page 5 System Description H3C S3600 Series Ethernet Switches Table of Contents Chapter 6 Guide to Purchase ....................... 6-1 6.1 Purchasing the Switch ....................... 6-1 6.2 Purchasing the SFP Interface Module ................6-2...
  • Page 6: Chapter 1 Product Overview

    Chapter 1 Product Overview 1.1 Preface H3C S3600 Series Ethernet Switches are wire speed L2/L3 Ethernet switches. They are intelligent network management switches intended for the use in a network environment where high performance, dense port distribution, and ease of installation are required.
  • Page 7: System Features

    System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Power Number Number of 1000 Number of 100 Console Model supply unit of service Mbps uplink Mbps ports port (PSU) ports ports AC-input, 48 10/100 Mbps S3600-52P- 4 (SFP)
  • Page 8 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Item S3600 series S3600-28P-SI, S3600-28TP-SI, S3600-28P-EI, S3600-28F-EI: 3.5kg. S3600-28P-PWR-EI, S3600-28P-PWR-SI: 5.8kg Weight S3600-52P-SI, S3600-52P-EI: 4kg S3600-52P-PWR-EI, S3600-52P-PWR-SI: 6.2kg Management 1 console port port S3600-28P-SI: 24 x 10/100 Mbps electrical ports + 4 x 1000...
  • Page 9: Service Features

    System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Item S3600 series S3600-28P-SI, S3600-28P-EI, S3600-28TP-SI: 40W S3600-28F-EI : 65W S3600-52P-SI, S3600-52P-EI: 50W S3600-28P-PWR-EI, S3600-28P-PWR-SI:  450W (AC) Dissipated power: 150W PoE: 300W  Power 430W (DC) consumption Dissipated power: 60W...
  • Page 10 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Feature S3600-SI series supports S3600-EI series supports 4k IEEE 802.1Q-compliant VLANs Virtual Local Area Network (VLAN) Port-based VLAN To discriminate and add IP telephony traffic to voice VLAN by...
  • Page 11 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Feature S3600-SI series supports S3600-EI series supports Up to 8 aggregation groups jumbo frame Supported Supported Multiple-to-one port mirroring (multiple monitored ports to one monitor port) Mirroring Traffic mirroring —...
  • Page 12 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Feature S3600-SI series supports S3600-EI series supports Configuration through the command line interface (CLI) Configuration through Telnet Configuration through the console port Simple Network Management Protocol (SNMP) Management Remote Monitoring ( RMON) 1/2/3/9 groups of MIBs...
  • Page 13 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Feature S3600-SI series supports S3600-EI series supports Hierarchical user management and password protection IEEE 802.1x authentication, Max on-line user connections is 1024 AAA & RADIUS & HWTACACS authentication MAC address learning limit...
  • Page 14 System Description H3C S3600 Series Ethernet Switches Chapter 1 Product Overview Feature S3600-SI series supports S3600-EI series supports Multicast source discovery protocol — Supported (MSDP) DNS Client Supported Huawei group management Supported protocol (HGMP) QinQ Supported GARP VLAN registration protocol...
  • Page 15: Chapter 2 Hardware Description

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Chapter 2 Hardware Description 2.1 S3600-28P-SI Ethernet Switch 2.1.1 Appearance The S3600-28P-SI has 24 x 10Base-T/100Base-TX Ethernet ports, four 1000 Mbps SFP interfaces and one console port on its front panel, and on its rear panel one power input.
  • Page 16 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Table 2-1 LEDs on the front panel of the S3600-28P-SI Mark Color Indicates The system passes the Power-On Self-Test Solid green (POST) and is operating normally. The system POST is Flashing green (1 Hz) running.
  • Page 17 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark Color Indicates A 100 Mbps link is Solid green present. A 100 Mbps link is Flashing green (3 Hz) present and the port is disabled. Speed Mbps link Solid yellow present.
  • Page 18 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark Color Indicates received/transmitted. Flashing yellow (3 The port fails POST. data being received/transmitted on the port. Flashing green (3 Hz) The port fails POST. PoE mode –– The port is connected,...
  • Page 19: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark Color Indicates Software A bar rotates clockwise downloadi PER flashes green around the display. “F”, meaning the FAN Fan failed PWR stays red fails. UNIT ID in the fabric;...
  • Page 20: Power Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Central Fiber Transmission SFP module Connector wavelength specifications segment 62.5/125 µm 275 m (902.23 multi-mode fiber ft.) 1000Base-LX-SFP 10 km (6.21 mi) 1310 nm 30 km (18.64 1000Base-LH-SFP Single...
  • Page 21: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Figure 2-2 The S3600-28TP-SI 2.2.2 Console Port and LEDs I. Console port The S3600-28TP-SI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1).
  • Page 22 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position state. –– –– POST flashes The POST test ID (in the running green range 1 to 9). POST flashes POST test ID of the failed...
  • Page 23 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position present. port Data being mode Flas received/transmitted the port Flashing yellow (3 The port fails POST. No link is present. The port is operating in full...
  • Page 24: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position 1000 Mbps link present. Green Data being Flas received/transmitted the port A 10/100 Mbps link is present. Speed Yellow Data being Flas received/transmitted the port Flashing yellow (3 The port fails POST.
  • Page 25: Attributes Of 1000 Mbps Sfp Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Attribute Description 10 Mbps, half duplex/full duplex Rate 100 Mbps, half-duplex/full duplex MDI/MDI-X auto-sensing Standard IEEE 802.3u Transmission segment 100 m (328.08 ft) over the category-5 unshielded over the selected medium twisted pair (UTP) cable 2.2.4 Attributes of 1000 Mbps SFP Ports...
  • Page 26: Power Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Attributes Description IEEE 802.3ab Transmission segment 100 m (328.08 ft) over the category-5 unshielded over the selected medium twisted pair (UTP) cable 2.2.6 Power Subsystem Following are the AC-input voltage specifications of the S3600-28TP-SI: Rated voltage: 100 to 240 VAC;...
  • Page 27: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.3.2 Console Port and LEDs I. Console port The S3600-52P-SI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1). II. LEDs You can learn the operating state of the S3600-52P-SI by reading the LEDs on its front panel (see Table 2-4).
  • Page 28: Power Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.3.5 Power Subsystem Following are the AC-input voltage specifications of the S3600-52P-SI: Rated voltage: 100 to 240 VAC; 50 to 60 Hz Max. tolerance: 90 to 264 VAC; 50 to 60 Hz 2.3.6 Cooling Subsystem...
  • Page 29 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Table 2-8 LEDs on the front panel of the S3600-28P-EI Mark and Color Indicates Position system passes Solid green Power-On Self-Test (POST) and is operating normally. The system is going through Flashing green (1 Hz) the POST.
  • Page 30 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position Solid green A 100 Mbps link is present. Flashing A 100 Mbps link is present and green (3 Hz) the port is disabled. Speed Solid yellow A 10 Mbps link is present.
  • Page 31 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position port connected, and the Solid device is in an IRF loop chain fabric. Green Data being Flashin received or/and sent on the port. port...
  • Page 32: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position POST PWR flashes The POST test ID (in the range running green (1 Hz) 1 to 9). POST PWR flashes POST test ID of the failed test.
  • Page 33: Power Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description  Note: The available 1000 Mbps SFP modules are subject to changes. For information on the latest module options, contact your sales agent. 2.4.5 Power Subsystem I. AC-input power Following are the AC-input voltage specifications of the S3600-28P-EI: Rated voltage: 100 to 240 VAC;...
  • Page 34: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.5.2 Console port and LEDs I. Console port The S3600-28F-EI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1). II. LEDs You can learn the operating state of the S3600-28F-EI by reading the LEDs on its front panel, see the following table.
  • Page 35 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 100 Mbps link is present. Green Data is being Flash received/transmitted on the port A 10 Mbps link is present. Speed Yellow Data is being...
  • Page 36 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position The port is connected, and the device is in an IRF loop chain fabric. Green Data is being Flash received/transmitted on the port The port is connected, and the device is in an IRF loop chain fabric.
  • Page 37 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 1000 Mbps link is present. Green Data is being Flash received/transmitted on the port A 10/100 Mbps link is present. Speed Yellow Data is being...
  • Page 38: Attributes Of 100 Mbps Sfp Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position The port is connected, and the device is in an IRF loop chain fabric. Green Data is being Flash received/transmitted on the port The port is connected, and the device is in an IRF loop chain fabric.
  • Page 39 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Table 2-11 100 Mbps SFP modules and cable specifications Central Fiber Transmission SFP module Connector wavelength specifications segment 62.5/125 µm 100Base-FX-MM-SFP multi-mode 2 km (1.24 mi) fiber 9/125µm 15 km (9.32...
  • Page 40: S3600-28P-Pwr-Ei Ethernet Switch

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Attribute Description Number of ports 10/100 Mbps, half duplex/full duplex Rate 1000 Mbps full duplex MDI/MDI-X auto-sensing IEEE 802.3u Standard IEEE 802.3ab Transmission segment 100 m (328.08 ft) over the category-5 unshielded...
  • Page 41: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Figure 2-6 The S3600-28P-PWR-EI 2.6.2 Console Port and LEDs I. Console port The S3600-28P-PWR-EI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1).
  • Page 42 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position 10/100 Mbps duplex mode, state Speed Solid green of the 1000 Mbps SFP ports, or fabric state. 10/100 Mbps duplex mode, state Mode LED...
  • Page 43 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 100 Mbps link is present. Green Data is being received/transmitted Flash on the port A 10 Mbps link is present. Speed Yellow Data is being received/transmitted...
  • Page 44 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 1000 Mbps link is present. Green Data is being received/transmitted Flash on the port Speed Flashing yellow The port fails POST. (3 Hz) No link is present.
  • Page 45: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.6.3 Attributes of the FE Ports Table 2-14 Attributes of the FE ports on the S3600-28P-PWR-EI Attribute Description Connector RJ-45 Number of ports 10 Mbps, half duplex/full duplex 100 Mbps, half-duplex/full duplex...
  • Page 46: Power System

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.6.5 Power System I. AC-input power Rated voltage: 100 to 240 VAC; 50 to 60 Hz Max. tolerance: 90 to 264 VAC; 50 to 60 Hz II. DC-input power Voltage: -53 to -55 VDC.
  • Page 47: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Figure 2-7 The S3600-28P-PWR-SI 2.7.2 Console Port and LEDs I. Console port The S3600-28P-PWR-SI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1).
  • Page 48 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position 10/100 Mbps duplex mode, state Speed Solid green of the 1000 Mbps SFP ports, or fabric state. 10/100 Mbps duplex mode, state Mode LED...
  • Page 49 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 100 Mbps link is present. Green Data is being received/transmitted Flash on the port A 10 Mbps link is present. Speed Yellow Data is being received/transmitted...
  • Page 50 System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Mark and Color Indicates Position A 1000 Mbps link is present. Green Data is being received/transmitted Flash on the port Speed Flashing yellow The port fails POST. (3 Hz) No link is present.
  • Page 51: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.7.3 Attributes of the FE Ports Table 2-16 Attributes of the FE ports on the S3600-28P-PWR-SI Attribute Description Connector RJ-45 Number of ports 10 Mbps, half duplex/full duplex 100 Mbps, half-duplex/full duplex...
  • Page 52: Power System

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.7.5 Power System I. AC-input power Rated voltage: 100 to 240 VAC; 50 to 60 Hz Max. tolerance: 90 to 264 VAC; 50 to 60 Hz II. DC-input power Voltage: -53 to -55 VDC.
  • Page 53: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Figure 2-8 illustrates the S3600-52P-EI: Figure 2-8 The S3600-52P-EI 2.8.2 Console Port and LEDs I. Console port The S3600-52P-EI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1).
  • Page 54: Attributes Of 1000 Mbps Sfp Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.8.4 Attributes of 1000 Mbps SFP Ports Depending on your needs, the S3600-52P-EI can provide four 1000 Mbps SFP ports which are numbered as 49, 50, 51 and 52 (optical or electrical) on its front panel.
  • Page 55: Console Port And Leds

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description Figure 2-9 The S3600-52P-PWR-EI 2.9.2 Console Port and LEDs I. Console port The S3600-52P-PWR-EI provides one EIA/TIA-232 compliant console port for local or remote switch configuration (see Table 2-1).
  • Page 56: Attributes Of 1000 Mbps Sfp Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.9.4 Attributes of 1000 Mbps SFP Ports The S3600-52P-PWR-EI has four 1000 Mbps SFP ports which are numbered from 49 to 52 (optical or electrical), the number or type of ports is optional.
  • Page 57: Cooling Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description The S3600-52P-PWR-EI provides power through 48 fixed Ethernet electrical ports,  and thus is able to support up to 48 remote Ethernet switches with a maximum transmission distance of 100 m (328 ft).
  • Page 58: Attributes Of The Fe Ports

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.10.3 Attributes of the FE Ports Table 2-19 Attributes of the FE ports on the S3600-52P-PWR-SI Attribute Description Connector RJ-45 Number of ports 10 Mbps, half duplex/full duplex 100 Mbps, half-duplex/full duplex...
  • Page 59: Power Subsystem

    System Description H3C S3600 Series Ethernet Switches Chapter 2 Hardware Description 2.10.5 Power Subsystem I. AC-input power Rated voltage: 100 to 240 VAC; 50 to 60 Hz Max. tolerance: 90 to 264 VAC; 50 to 60 Hz II. DC-input power Voltage: -53 to -55 VDC.
  • Page 60: Chapter 3 Software Features

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features Chapter 3 Software Features 3.1 Basic Features 3.1.1 Link Aggregation The link aggregation function is used for the connection between Ethernet switches or between the switches and high-speed servers. It is a simple and cheap way to expand the bandwidth of a switch port and balance the traffic among all the ports in a link aggregation.
  • Page 61: Vlan

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features series can implement broadcast suppression not only based on port rate ratio but also on pps. For the S3600 series, the broadcast suppression function not only can be enabled/disabled globally in the whole fabric, but also can be enabled/disabled on individual ports.
  • Page 62: Network Protocol Features

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features RSTP is a single spanning tree protocol, that is, only one tree is generated within a switching network. To ensure the interior communications of VLANs, each VLAN of a network must be consecutively distributed along the spanning tree;...
  • Page 63: Dhcp Relay

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features 3.2.2 DHCP Relay An Ethernet switch with DHCP Relay enabled relays the messages between a DHCP server and a client. It can have a DHCP server in a subnet serves another subnet that has no DHCP server.
  • Page 64: Routing Features

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features client. Such information can be notified to 802.1x. In addition, you can query and analyze such information. The DHCP snooping trust function is based on DHCP snooping. By configuring ports to...
  • Page 65: Rip

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features 3.3.2 RIP Routing information protocol (RIP) is a widely used interior gateway protocol (IGP) and is D-V Distance-Vector (D-V) algorithm-based. It is suitable for small-sized and simple networks. RIP switches routing information with User Datagram Protocol (UDP) datagrams and sends updates regularly.
  • Page 66: Igmp

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features hearing an IGMP Leave message, it removes the host from the multicast table. By continuously listening to IGMP packets, the switch creates and maintains a L2 MAC multicast address table and based on which forwards the multicast packets sent from the upstream router.
  • Page 67: Mvr

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features 3.4.5 MVR MVR provides the ability to continuously send multicast streams in a multicast VLAN and isolate the streams from user VLANs. For a user to receive the multicast streams, MVR requires the user port to join the multicast VLAN.
  • Page 68: Qos

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features 3.6 QoS Quality of service (QoS) provides differentiated network services to accommodate to various demands. 3.6.1 Traffic Classification Traffic classification is to classify packets to facilitate the subsequent packet processing conducted by a switch.
  • Page 69: Port Rate-Limiting

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features 3.6.4 Port Rate-Limiting Port rate-limiting is applied to transmit ports to monitor and limit the bandwidth allocated to traffic. For this purpose, a rate threshold is set on the transmit ports and the traffic that exceeds the threshold is discarded.
  • Page 70 System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features I. SP Queue High Dequeue Medium Classify Packets left Packets to be sent Normal the interface via this interface Figure 3-1 SP The SP mechanism applies to key services that are delay sensitive and must have priority when congestion occurs.
  • Page 71: Traffic Shaping

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features packets, it assigns bandwidth to each flow according to their precedence, with a smaller precedence value indicating less bandwidth. If on a port there are eight flows with the precedence values of 0, 1, 2, 3, 4, 5, 6, and 7 respectively, then the total bandwidth is the sum of (precedence value + 1)s: 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 = 36.
  • Page 72: Web Cache Redirection

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features dynamically delivers the profile to the user access port, thus providing a set of pre-defined service quality guarantees for the user. Currently, the QoS profile feature on the switch can provide the following functions: packet filtering, traffic monitoring, and priority tagging.
  • Page 73: Security

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features When multiple systems are used to deal with complex events, it ensures the  correct order of these events. It ensures the RPC between systems be normally performed. ...
  • Page 74: Port Isolation

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features same time. The SSH client allows users to connect to the Ethernet switches and UNIX mainframes that support SSH servers. 3.9.3 Port Isolation Port isolation means layer 2 isolation of the ports in the same VLAN so that layer 2 relay cannot be done between a port and another ( or another group of ) port, but it can communicate with the port in the upper layer.
  • Page 75: Mac Address Learning Limit

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features address. If found, the user is authenticated and the MAC address will be automatically added to the corresponding port; if not, the authentication fails and the packet will be discarded.
  • Page 76: Mac-Ip-Port Binding

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features II. RADIUS RADIUS is a distributed system in the client/server model. It can fend off invalid users and is often used in a network environment where both high security and remote user access are desired.
  • Page 77: Cluster Management

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features VRRP is a fault tolerance protocol which uses the standby mechanism to improve the reliability of establishing connections with a router. VRRP assures reliability through grouping multiple routers on a LAN segment into one standby group.
  • Page 78: Qinq Bpdu Tunnel

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features QinQ does not need the support of signaling protocol. It can be implemented by  fully static configurations. Primarily, QinQ can solve the following problems: QinQ relaxes the shortage of public VLAN IDs;...
  • Page 79: Gvrp

    System Description H3C S3600 Series Ethernet Switches Chapter 3 Software Features destination MAC addresses and then submits them to different applications (GVRP or GMRP) for processing. 3.13.2 GVRP GVRP is a GARP application. Based on the GARP mechanism, GVRP maintains dynamic VLAN registration information in a routing switch and transmits the information to other routing switches.
  • Page 80: Chapter 4 System Maintenance And Management

    System Description H3C S3600 Series Ethernet Switches Chapter 4 System Maintenance and Management Chapter 4 System Maintenance and Management 4.1 Simple and Flexible System Maintenance 4.1.1 System Configuration The S3600 series can be configured through the command line interface (CLI), NMS, HGMP, or Web.
  • Page 81: Quidview Nms

    System Description H3C S3600 Series Ethernet Switches Chapter 4 System Maintenance and Management The S3600 series allow you to upgrade the software: Through a serial port with the XModem protocol.  Through an Ethernet port with TFTP or FTP (at the local or remotely).
  • Page 82: Security Management

    System Description H3C S3600 Series Ethernet Switches Chapter 4 System Maintenance and Management 4.2.5 Security Management The Quidview provides many security measures to strictly authenticate the user’s operations and ensure the system security. It offers detailed operation log for later query and analysis.
  • Page 83: Chapter 5 Networking Applications

    System Description H3C S3600 Series Ethernet Switches Chapter 5 Networking Applications Chapter 5 Networking Applications You can deploy S3600 series on many types of networks such as enterprise networks and broadband access networks. Following are several typical networking applications. 5.1 Broadband Ethernet Access for Residential Communities On the broadband access network of a residential community, an S3600 series switch is located in the center.
  • Page 84 System Description H3C S3600 Series Ethernet Switches Chapter 5 Networking Applications Internet Internet Internet Internet / 企业网络 Internet / 企业网络 Internet / 企业网络 Internet / 企业网络 Internet / 企业网络 Internet / 企业网络 /Enterprise network /Enterprise network /Enterprise network Rotuer Rotuer...
  • Page 85: Application In Large Enterprise And Campus Networks

    System Description H3C S3600 Series Ethernet Switches Chapter 5 Networking Applications 5.3 Application in Large Enterprise and Campus Networks In a large enterprise or campus network, the S3600 series are located at the convergence layer. They are downlinked to layer 2 switches, S3000 Series for example;...
  • Page 86 System Description H3C S3600 Series Ethernet Switches Chapter 5 Networking Applications series series 3600 3600 3000 series series Figure 5-4 IRF Network diagram...
  • Page 87: Chapter 6 Guide To Purchase

    System Description H3C S3600 Series Ethernet Switches Chapter 6 Guide to Purchase Chapter 6 Guide to Purchase To meet varied customer needs, S3600 series can be delivered to your order. You can purchase the switch and optional interface modules as needed.
  • Page 88: Purchasing The Sfp Interface Module

    System Description H3C S3600 Series Ethernet Switches Chapter 6 Guide to Purchase -48 VDC) 6.2 Purchasing the SFP Interface Module Table 6-2 Interface module purchase list Fiber specifications Central SFP module Connector and transmission Quantity Note wavelength segment 62.5/125 µm...
  • Page 89 System Description H3C S3600 Series Ethernet Switches Chapter 6 Guide to Purchase Fiber specifications Central SFP module Connector and transmission Quantity Note wavelength segment Single mode fiber Option 1510nm 0 to 4 10 km (6.21 mi) Single mode fiber Option...

Table of Contents