H3C S3600 Series Installation Manual page 41

Installation Manual
H3C S3600 Series Ethernet Switches
III. Attributes of the 10Base-T/100Base-TX Ethernet ports
Table 1-13 Attributes of the 10Base-T/100Base-TX Ethernet ports
Connector
Number of ports
Rate
Standard
Transmission distance over
the selected medium
IV. Attributes of the 1000Base-X SFP ports
The S3600-28P-PWR-SI/S3600-28P-PWR-EI provides four 1000Base-X SFP ports
numbered 25 to 28 on the front panel.
Note:
SFP modules do not support PoE.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
Note:
The types of 1000Base-X SFP modules may be subject to changes without notice.
Consult H3C marketing personnel or technical support personnel to obtain the latest
information about SFP modules.
For specifications of SFP modules, refer to H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
V. Console port
The S3600-28P-PWR-SI/S3600-28P-PWR-EI provides one EIA/TIA-232 compliant
Console port for local or remote switch configuration. For the attributes, see Table 1-4.
Attribute
RJ-45
24
100 m (328.08 ft) over the category-5 unshielded
twisted pair (UTP) cable
Description
10/100 Mbps, half duplex/full duplex
MDI/MDI-X auto-sensing
PoE
IEEE 802.3u
IEEE 802.3af
1-33
Chapter 1 Product Overview