H3C S3600 Series Installation Manual page 29

Installation Manual
H3C S3600 Series Ethernet Switches
LED
Mode
LED
7-
segment
digital
LED
100Base
-X SFP
port
status
LED
Mark Color
Speed Solid green
Mode
Duplex Solid yellow
POST The PWR LED
running flashes green.
The PWR LED
POST
flashes yellow.
failed
PWR stays red
Software The PWR LED
Unit
loading flashes green.
Fan The PWR LED is
failure solid red
Unit id Button released
Green
Speed
Flashing yellow
(3 Hz)
OFF
—
Green
Duplex
Flashing yellow
(3 Hz)
OFF
1-21
Chapter 1 Product Overview
Indicates
Rate information of the
10Base-T/100Base-TX
Ethernet ports and the
1000Base-X SFP ports.
Duplex information of
10Base-T/100Base-TX
Ethernet ports and the
1000Base-X SFP ports.
Flashes the POST test ID of the
failed test.
POST test ID of the failed test.
A bar rotates clockwise around
the LED.
Displays "F".
Displays the unit ID in the
fabric; and displays "1" if there
is only one unit.
Flashes the POST test ID of the
failed test.
ON A 100 Mbps link is present.
Data is being received/sent on
Flash
the port
The port fails POST.
No link is present.
The port is operating in full
ON
duplex mode
Data is being received/sent on
Flash
the port
The port fails POST.
No data is being received/sent
on the port.