H3C S3600 Series Installation Manual page 26

Installation Manual
H3C S3600 Series Ethernet Switches
LED
Status
LED of
1000Bas
e-X SFP
port
serving
as a
fabric
port
III. Attributes of the 10Base-T/100Base-TX Ethernet ports
See Table 1-3.
IV. Console port
The S3600-28P-EI provides one EIA/TIA-232 compliant Console port for local or
remote switch configuration. For the attributes, see Table 1-4.
V. Attributes of the 1000Base-X SFP ports
The S3600-28P-EI provides four 1000Base-X SFP ports numbered 25 to 28 on the
front panel.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
Mark Status
Green
Yellow
Speed
Flashing green
(3Hz)
Flashing yellow
(3 Hz)
—
OFF
Green
Duplex
Flashing yellow
(3 Hz)
OFF
Flashing yellow
PoE
(3 Hz)
mode
OFF
1-18
Chapter 1 Product Overview
Indication
The port is connected, and the
ON
device is in an IRF loop fabric.
Data is being received/sent on
Flash
the port.
The port is connected and the
ON
device is in an IRF chain fabric.
Data is being received/sent on
Flash
the port.
A fault occurs to the fabric.
The port fails to pass POST.
The port is not connected.
The port is operating in full
ON
duplex mode.
Data is being received/sent on
Flash
the port.
The port fails to pass POST.
The port is not connected.
The port fails a POST.
––