H3C S3600 Series Installation Manual page 80

Installation Manual
H3C S3600 Series Ethernet Switches
3. set web files
0. return
Enter your choice(0-3):1
II. Set the attributes of application, configuration, or Web files as needed. In
this example, enter 1 to select "1. set application files".
File Number
======================================================================
1(*)
2(b)
3
Free Space: 2682880 bytes
(*)-with main attribute
(b)-with backup attribute
(*b)-with both main and backup attribute
Please input the file number to change:
III. Set the attribute of file 2 to main.
Please input the file number to change: 2
Please input the file attribute to change (main/backup): main
The attribute of S3600-1.bin is changed from main to none!!
When setting the attribute of a file, you can use the strings listed in the following table.
The strings are case-insensitive.
Table 5-2 String to Input for the Attribute
main
backup
If a file has neither the main attribute nor the backup attribute after you change the
attributes of other files, the device will give the file the attribute of none and display an
alert message.
IV. If you change the attribute of an application file to main, the device will
display a message for you to confirm whether you want to boot the device
immediately.
Do you want to run S3600-2.bin now? Yes or No(Y/N) y
If you enter y, the device will reboot immediately. If you enter n, the device will return to
the [Select application file to boot] submenu.
File Size(bytes)
4719134
3886308
3886308
Attribute
5-4
Chapter 5 Loading Boot ROM and Host Software
File Name
S3600.bin
S3600-2.bin
S3600-3.bin
String to input
m, ma, mai, or main
b, ba, bac, back, backu, or backup