H3C S3600 Series Installation Manual page 19

Installation Manual
H3C S3600 Series Ethernet Switches
LED
7-segme
nt digital
LED
III. Attributes of the 10Base-T/100Base-TX Ethernet ports
The S3600-28TP-SI provides twenty-four 10Base-T/100Base-TX Ethernet ports
(numbered from 1 to 24) on the front panel. For attributes of these ports, see Table 1-3.
IV. Attributes of the 1000Base-X SFP ports
The S3600-28TP-SI provides two 1000Base-X SFP ports numbered 25 and 26 on the
front panel.
SFP modules allow for great flexibility because they are hot swappable and user
configurable.
Table 1-5 lists the available SFP modules.
Note:
The types of 1000Base-X SFP modules may be subject to changes without notice.
Consult H3C marketing personnel or technical support personnel to obtain the latest
information about SFP modules.
For specifications of SFP modules, refer to H3C Low End Series Ethernet Switches
Pluggable Modules Manual.
Mark Status
The PWR
POST
LED flashes
running
green
The PWR
LED flashes
yellow
POST
failed
The PWR
LED is solid
red
Unit
Softwar The PWR
e LED flashes
loading green
The PWR
Fan
LED is solid
failure
red
Button
Unit ID
released
Displays the POST test ID (in the
range of 1 to 9).
Flashes the POST test ID of the
failed test.
A bar rotates clockwise around the
LED.
Displays "F".
Displays the unit ID in the fabric,
and displays "1" if there is only one
unit.
1-11
Chapter 1 Product Overview
Indication