Chapter 3 Installation; Mounting The Switch; Mounting The Switch Into A 19-Inch Standard Cabinet - H3C S3600 Series Installation Manual

Installation Manual
H3C S3600 Series Ethernet Switches
Caution:
When you ask your sales agent to maintain the switch, you must ensure that the
dismantlement-preventive seal on a mounting screw of the switch chassis is intact. If
you want to open the chassis, you should contact the agent for permission. Otherwise,
you will bear any consequence resulted from your actions without permission.

3.1 Mounting the Switch

3.1.1 Mounting the Switch into a 19-Inch Standard Cabinet

You can install the S3600 into a 19-inch standard cabinet in one of the following four
ways:
Use front mounting ears
Use front mounting ears and a tray
Use front mounting ears and rear mounting ears
Use front mounting ears and guide rails
The installation methods depend on the width and depth of the switch. For the specific
installation methods, see Table 3-1.
Table 3-1 Installation methods for a switch with a width of 440 mm (17.3 in)
Depth
260 mm (10.2
in)
420 mm (16.5
in)

Chapter 3 Installation

Use front
Method
mounting
ears
√
—
Use front
Use front and
mounting
rear mounting
ears and a
ears
— √
√ √
3-1
Chapter 3 Installation
Use front
mounting
ears and
tray
guide rails
√
√