Danfoss ECL Comfort 210 Installation Manual page 95

Installation Guide
3.4 Monitoring temperatures and system components
This section describes the function in general for the ECL Comfort
210 / 310 series. The shown displays are typical and not application
related. They might differ from the displays in your application.
Boiler circuit
The overview display in the boiler circuit ensures a quick overview
of the actual and (desired) temperatures as well as the actual state
of the system components.
Display example:
49 °C Boiler temperature
(45) Desired boiler temperature
Return temperature
25 °C
(35)
Return temperature limitation
The display example is from an A375 application with 4 boilers. In
the A275 applications, the display will only show 1 boiler.
Heating circuit
The overview display in the heating circuit ensures a quick
overview of the actual and (desired) temperatures as well as the
actual state of the system components.
Display example:
49 °C Flow temperature
(31) Desired flow temperature
24 °C Return temperature
(50) Return temperature limitation
Danfoss District Energy
ECL Comfort 210 / 310, application A275 / A375
VI.GU.L1.02 DEN-SMT/DK 95