System - Danfoss ECL Comfort 210 Installation Manual

Installation Guide

8.8 System

8.8.1 ECL version
In 'ECL version' you will always be able to find an overview of the
data related to your electronic controller.
Please have this information available if you need to contact your
Danfoss sales organization concerning the controller.
Information about your ECL Application Key can be found in 'Key
functions' and ' Key overview' .
Code no.:
Hardware:
Software:
Serial no.:
Production week:
8.8.2 Extension
ECL Comfort 310 only:
'Extension' will offer you information about additional modules, if
any. An example could be the ECA 32 module.
8.8.3 Ethernet
The ECL Comfort 310 has a Modbus/TCP communication interface
that allows the ECL controller to be connected to an Ethernet
network. This allows remote access to the ECL 310 controller based
on standard communication infrastructures.
In 'Ethernet' it is possible to set up the required IP addresses.
8.8.4 Portal config
The ECL Comfort 310 has a Modbus/TCP communication interface
that allows the ECL controller to be connected to the internet.
Internet related parameters are set here.
8.8.5 M-bus config
The ECL Comfort 310 has an M-bus communication interface that
allows energy meters to be connected as slaves.
M-bus related parameters are set here.
8.8.6 Energy Meters
The ECL Comfort 310 allows communication with up to 5 energy
meters via M-bus. In 'Energy Meters' data can be read the from
M-bus connected energy meters
Danfoss District Energy
ECL Comfort 210 / 310, application A275 / A375
The Danfoss sales and order no.
for the controller
Hardware version of the
controller
Software version of the
controller
Unique number for the
individual controller
Week no. and year (WW.YYYY)
Example, ECL version
VI.GU.L1.02 DEN-SMT/DK 163