Registration; Image Position/Magnification - Ricoh Pro C7500 Original Instructions Manual

3. Details of Detailed Settings

Registration

Image Position/Magnification

Auto Adjust Image Position
1102 [Auto Adjust Image Position]
Function
• No. of Check Sheets: Front Side
Auto Adjust Image Position: Change the number of sheets for printing the chart used to check
the adjustment result when the machine is set to print on one side and for printing charts when
printing on one side.
• No. of Check Sheets: Front & Back Sides
Auto Adjust Image Position: Change the number of sheets for printing the chart used to check
the adjustment result when the machine is set to print on both sides and for printing charts
when printing on both sides.
• Adjust Image Length According to Adjustment Result: Side 1/Side 2
Adjust the magnification in the paper feed direction, which is applied to the Auto Adjust Image
Position result. The entered value is applied by executing Auto Adjust Image Position again
after making the entry.
When to use
• No. of Check Sheets: Front Side/No. of Check Sheets: Front & Back Sides
Adjust this number to change the number of sheets to print to check the adjustment result. For
correcting the differences in registration between the front and back of the paper, increase the
number check the print quality including the registration. (As the default, this is set to "1".)
• Adjust Image Length According to Adjustment Result: Side 1/Side 2
Specify this setting if it is required to adjust the magnification in the paper feed direction every
time after executing Auto Adjust Image Position.
Image Position Feedback Correction
1103 [Image Position Feedback Correction]
Function
Select the Image Position Feedback Correction mode.
32