Dive Platform - Integrated W/Ladder - Pro-Line Boats 2008 29 Super Sport Owner's Manual

Dive Platform - Integrated w/Ladder

An integrated Euro style dive platform is built into the fiberglass
construction of the deck and hull and includes a stainless steel ladder
on the starboard side of the transom.
An optional dive ladder can be installed on the port side of the dive
platform for additional boarding capability. When factory installed, this
option includes the installation of an additional grab rail on the port
transom. With the engines tilted down, passengers can move easily
through the transom door and across the large dive platform to the
optional ladder.
Rigid T-Top with Storage Box (Optional)
The anodized aluminum frame comes with a rigid top and built in storage box. A set of 4 rod holders is
permanently mounted to the aft edge of the frame; providing you with additional rod holder capacity. See
the Service and Care section of this manual for cleaning recommendations for the anodized aluminum
frame and the top.
Note: Pro-Line installs mounting pads to the frame for additional support when outriggers
are factory installed. Before adding after market outriggers, we recommend that you
consult your Pro-Line dealer's Service Department or another qualified service
professional to add mounting pads to the T-Top frame.
Rod holders
Rigid T-Top with Storage Box & Outriggers (Optional)
When factory installed, this options includes the same frame and storage box as above. However, with
the installation of the outriggers, we have included mounting pads for additional support.
When this option is selected and factory installed, the outrigger installation includes a pair of outrigger
bases, poles and lines. The bases are constructed of anodized aluminum and are installed on the port
and starboard sides of the optional T-top. Turn the handle at the bottom of the outrigger base to rotate
the outriggers 90 degrees (from the side to the aft end of the boat).
Storage box
Speakers
Rod holders
37