Hardware; Cleats; Bow Rail; Bow Pulpit W/Anchor Roller And Rope Locker Storage - Pro-Line Boats 32 Express 2006 Owner's Manual

Hardware

Cleats

Your boat is equipped with 2 pop-up and 5 standard cleats. They are installed to provide areas to permit
you to tie off the boat at dockside, tie off to another boat that is anchored, secure bumpers/fenders,
and/or tie off the anchor (when dropped) to prevent the line from pulling on the windlass, etc. You should
never use the cleats for towing another boat or skier.

Bow Rail

The bow rail is constructed of stainless steel. The railing, which is through bolted to the gunwale, is
provided for safety. Never use the bow rail to tie off to anything heavier than a bumper/fender. Do not
use the bow rail for anchoring, or to tie off to the dock or another boat. Do not use the bow rail to tow
another boat or skier. Never stand on the bow rail or use it as leverage when pulling up an anchor, a fish
or any other objects. Do not use the bow rail to tie off and/or secure a large catch, etc.
Bow Pulpit with Anchor Roller and Rope Locker Storage
We have installed an aluminum anchor roller with built in bow protector at the bow pulpit. The anchor line
is secured inside the anchor locker and is then routed through the windlass and anchor roller. The
anchor (not included as standard equipment) is held on the line beneath the bow pulpit. This allows you
to move about the bow area safely without tripping over the line or anchor.
Bow Pulpit
w/Anchor Roller
Rope Locker
Storage

Grab Rails

A set of 4 stainless steel grab rails has been installed to provide safe boarding and navigation on the
boat. They are located at the port transom ladder, around the baitwell station, on the port side cabin wall
as you step down into the cabin and on the forward wall of the head.

Dive Platform - Integrated w/Ladder

An integrated Euro style dive platform is built into the
fiberglass construction of the deck and hull and includes a
stainless steel dive ladder on the port side of the transom.
With the engines tilted down, passengers can move easily
through the transom door and across the large dive platform
for safe access to the dive ladder.
An optional ladder can be installed on the starboard side of
the dive platform to allow additional boarding capability.
When factory installed, this option includes the installation of
an additional grab rail on the starboard transom.

Gunwale Trim / Rubrail

A white rigid vinyl gunwale trim with a vinyl insert is installed at the juncture of the deck and hull. This
durable trim provides a nice clean look and serves as somewhat of a cushion when you are docking,
coming along side another vessel, etc.
See the Service and Care section of this manual for cleaning recommendations.
48