Advertisement
T
T
r
316-125 VaJve Seat Cutter Pilot
Engine Type: 4.236 (0.015 in oversize)
This piJot is for vaJve bores which have been
reamed 0.015 in oversize.
316-13 Valve Seat Cutter Pilot
Engine Type: 4.236 (0.030 in oversize)
This piJot is for vaJve bores which have been
reamed 0.030 in oversize.
PD 137 Valve Bore Reamer (0.015 in overstz.e)
Engine Type: 4.236
This reamer is only suitable for guideJess cyl'inder
heads.
PD 138 Valve Bore Reamer (0.030 in oversize)
Engine Type: 4.236
This reamer is onJy suitable for guideJess cyJinder
heads.
7066
Orcfip Pliers
Engine Type : AII
Two types of points are available.
t
in shaft size.
t
in
-
1 in "B" shaft sire I in
-
3 in.
3SS Connecting Rod Alignment Jig
Engine Type: All
Enables a quick check to be made on the align-
ment of connecting rods -
various adaptors are
required as follows :-
336 Multi-PurI")8e Con. Rod Arbor
Engine Type: All
Required with the above tooI.
PD 336-1 Adaptor
Engine Type :
P3 P3.I44 B3.152 3.152 4.192 4.203 P4
P6 6.288 6.305
This adaptor is fitted into the big end bore when
checking alignment. (Thin wall bearings only).
PD 336-3 Adaptor
Engine Type: L4 4.270
Remarks: See PD 336-1
PD 336-5 Adaptor
Engine Type: 4.99 4.107
Remarks: See PD 336-1
PD 336-6 Adaptor
Engine Type: 6.354 4.236
Remarks: See PD 336-1
6118 VaJve Spring Compressor
Engine Type: All
Thirivalve spring compressor bas been desig.'1ed to
remove valve springs without removing the cylin-
der head, providing the adaptors are available.
PD 6118-1 Valve Spring Compressor Adaptor
Engine Type: 4.99 4.107 4.108
The adaptor is fitted to the rocker shaft securing
studs.
PD 6118-2 Valve Spring Compressor Adaptor
Engine Type:
P3 P4 P6 6.288 6.305 S6
Remarks: See PD 6118- 1
PD 6118-3 Valve Spring Compressor Adaptor
Engine Type :
P3.144 B3.152 3.152 4.192 4.203 L4
4.270 R6 F340
Remarks: See PD 6118-1
PD 6118-4 VaJve Spring Compressor Adaptor
Engine Type: 6.354 4.236
Remarks: See PD 6118-1
PD 317-23 Valve Seat Cutter Exhaust
PD 317-26 Valve Seat Cutter fnlet
317-G22 Glaze Breaker Exhaust
317-G2.5 GJaze Breaker fnlet
Engine Type :
P3 P3.144 B3.152 3.152 4.192 4.203 P4
P6 6.288 6.305
The above cutters have been designed to cut seats
to the correct angle and at the same time reduce
seat width. It is strongly recommended that the
glaze breakers be used first as this will greatly
reduce the chattering of the cutters.
PD 317-2.5 Valve Seat Cutter Exbaust
PD 317-29 Valve Seat Cutter fnlet
317-GJO Glaze Breaker Exhaust and fnlet
Engine Type :
L4 4.270 R6 F340
Remarks: See PD 317-23
317-30 Valve Seat Cutter Exbaust and Inlet
317G-JO Glaze Breaker Exbaust and fnlet
Engine Type :
6.354 4.236 D4.203 D3.152
Remarks: See PD 317-23
PD 317-18 Valve Seat Cutter Exhaust
PD 317-22 VaJve Seat Cutter InJet
317-G19 Glaze Breaker Exhaust and fnJet
Engine Type:
.
4.99 4.107 4.108
Remarks: See PD 317-23
FC9900 Ato~r
Tester
Engine Type: All
This is a portable tester fitted with a paper filter
element.
Advertisement
