Advertisement
~
-
APPROVED
Available trom V. L. Churchill & Co. Ltd., Daventry, Northamptonshire, England.
R6 P3.144 3.152 83.152 4.192 4.203
Removes water pump pulley on1y on
6.305 L4 4.270 4.99 4.107 4.108
Removes water pump pulley and camshaft gear
on
6.354
PD lSSA-2 SDM1D Adjustable PuJIer Adaptors
Engine Type: P3
P4 P6
To remove Iow position water pump pulley.
PD IC Valve Guide Remover and Replacer
Engine Type: All
With tbis tooI. all valve guides can he removed and
replaced provided pulIer bars are available.
PD IC-I PuIIer Bars
Engine Type: All
Two bars are supplied for use with PD ICto suit
h in and
i
in i/ct valve guide bores.
PD IC-2 Valve Guide RepJacing Stop
Engine Type: 4.99 4.107 4.108
When the valve guide is replaced using one of
these stops. it will ensure that the guide protrudes
the correct amount above tbe top face of the
cylinder head.
PD IC-3 Valve Guide Replacing Stop
Engine Type: 6.354 4.236
Remarks: See PD 1C.2
PD lSSA-4 smaU Adjustabie ruller Adaptor
EngineType:
P3.144 3.152 B3.152 4.192 4.203
Removal of Dil pump gear.
No. 3 Tension Wrench
Engine Type: All
t
in square drive 25 to 170 lbf ft.
PD ISO Cylinder Liner Remover and Replacer
Engine Type :
6.354 4.236 3.152 03.152 4.203 04.203
6.305
PD 150-1 Cylbt«tr Liner Remover/Repfaéer Pa~
Engine Type :
6.354 4.236 3.152 03.152 4.203 D4.203
6.305
For use with PD 150.
316X Vatve Seat Cutter HandJe
Engine Type: AII
This tooi is required for the operation of ali
cutters and pilots.
316-10 Valve Seat Cutter Pilot
Engine Type:
P3 P3.144 3.152 B3.152 4.107 4.99 4.108
4.192 4.203 P4 P6 6.288 6.305
This pilot is suitable for all guides that have a
nominal
frr
in i/d bore.
316-12
Valve Seat Cutter Pilot
Engine Type:
L4 4.270 R6 F340 56 4.236 6.354
This pilot is suitable for all guides having a
nominal
t
in iid bore.
PD lC-4 Valve Guide Replacing Stop
Engine Type :
P3
P3.144
B3.152
3.152
4.192
4.203
P4
P6
6.288 6.305
Remarks: See PD lC.2
38 U3 Piston Assembly Ring
Engine Type: All
This is an expandable piston assembly ring for
Stct. and oversize pistons on all engine types.
PD 37 Flywheel Runout Gauge
Engine Type: All
With this tooi, a check caD speedily be made on
the alignment of the ftywheel, ftywheel housing or
back plate.
PD 418 PNon Height and Vatve Depth Gauge
Engine Type: All
For checking piston heights and valve depths.
PD 155A SomD Adjustable ruller
Engine Type: All
CaD be used with suitable adaptors to remove
water pump pulley, oil pump drive gears and
camshaft gear.
PD 155A-l Small Adjustable PuUer Adaptors
Engine Type :
J'
J'
Advertisement
