How To Install Spool Holder - JUKI DX-2000QVP Instruction Manual

How to install spool holder

A spool on which thread is thickly wound can be set.
This spool is useful when sewing many stitches at a
time such as quilting.
3
F
C
2
D
1
2
E
G -1
G -2
2
B
1
A
3
4
Attention
If you pull the spool holder diagonally or swift-
ly, it can be broken.
Attaching the spool holder.
・ Install base plate A on the back surface of
the sewing machine with two screws.
・ Carefully insert spool holder B into plate A
until you hear a snick.
Attaching the thread guide post.
・ Open the top cover of the sewing machine
and insert the thread guide post C into
mounting hole D .
・ Fit thread guide E over the thread guide
post with the arrow on the top of the former
faced toward the front of the sewing ma-
chine.
Raise the thread guide post fully.
・ Turn the spool holder until it engages the
positioning stopper F with a click.
Set the thread on the spool holder. Draw the
thread from the spool which is thickly wound
with thread you have placed on the spool hold-
er. Put the thread on thread guide G -1 and
G -2 in the written order and thread the ma-
chine head as usual.
113