Machine Maintenance - JUKI DX-2000QVP Instruction Manual

Machine Maintenance

When lint and/or dirt has built up, it may cause machine
failures. Therefore, clean the machine frequently.
Straight stitch
slide plate
Throat plate
Bobbin case
holder
118
Always must be disconnected plug from sock-
et-outlet before remove throat-plate and re-
move bobbin-case-holder.
1
Move the straight stitch slide plate toward
you (normal needle hole).
Lever
Move the lever to the right to use the normal needle hole.
2
Remove the throat plate.
Remove needle and presser foot and remove the needle
plate by using T-shape screwdriver.
3
Remove the bobbin case holder.
4
Remove lint and dirt.
Remove lint and dirt around the feed dog and bobbin
case holder with the cleaning brush.
5
Install the bobbin case holder.
Install the bobbin case holder so that points A and B
touch each other.
Install the throat plate.
When attaching the throat
plate, align the positioning
B
pins with holes of throat
plate.
A
Attention