Type And Usage Of Options - JUKI DX-2000QVP Instruction Manual

Type and usage of options

Type of options
Changing the seam
1
width of buttonhole
Change of needle
2
position
Selecting the stop
3
position of needle
Twin needle sewing
4
5 Foot switch function
Presser foot pivot
6
function
Setting the pivot height
7
Setting the float-
8
function height
Setting of the presser
foot lifting after thread
9
trimming
Adjusting the darning
!0
Adjustable starting
!1
stitch speed
Adjustable reverse
!2
stitch speed
!3 Guide
Adjusting the touch
!4
panel sensitivity
Contrast of Liquid
!5
Crystal Display (LCD)
Button reception
!6
buzzer volume setting
Language setting
!7
!8 Elongation
Deleting the settings
!9
The seam width of buttonhole is changeable.
You can change the stitch base line.
You can select the needle position (needle-up or
needle-down) when the sewing machine stops.
Select this option when using twin needle.
You can select the operation to be carried out when
depressing the front section of the foot controller.
You can select the operation from among "reverse
stitch", "lock stitch", "half stitch sewing", "one stitch
sewing", "presser foot lifting/lowering", "thread
trimming" and "no function".
You can select the setting where the presser foot
goes up with the needle held in the needle-down stop
position when you stop the sewing machine.
You can set the presser foot height in the case of
using the pivot function.
Setting range: 2.0 - 6.0 mm (in increments of 1 mm)
You can set the presser foot height when pressing the
float function button.
Setting range: 0.0 - 2.5 mm (in increments of 0.1 mm)
You can select the setting where the presser foot
goes up automatically after the completion of thread
trimming.
This function is used for adjusting the pattern shape.
Adjustable range: -30 - 30
You can select the sewing speed to be employed at
the start of sewing.
You can select the reverse stitch speed and lock stitch
speed.
The guide for winding bobbin thread, setting of
bobbin, threading of needle thread, changing presser
foot and needle can be seen on the LCD display.
You can adjust the touch panel sensitivity in five
steps.
The LCD contrast can be chosen from 11 levels.
You can change the volume of buzzer that is produced
when pressing the button on the touch panel.
You can select language from 8 languages or
pictographs.
The length of the patterns (Decorative 2: No.53 ~ 69)
can be adjusted. Adjusting range is from size 1 to size
5.
You can reset all settings to their default settings.
If the pow-
If a pattern er is turned
Default
is selected OFF and
setting
again re-turned
ON
The setting
The current
will return
Standard setting will
to the
remain.
default.
The setting The setting
(Depend-
will return will return
ing on the
to the to the
pattern)
default. default.
Stop with The current The current
the needle setting will setting will
down remain. remain.
The current The current
Single
setting will setting will
needle
remain. remain.
The current The current
Reverse
setting will setting will
stitch
remain. remain.
The current The current
ON setting will setting will
remain. remain.
The current The current
2.0 setting will setting will
remain. remain.
The current The current
0.5 setting will setting will
remain. remain.
The current The current
ON setting will setting will
remain. remain.
The current The current
0 setting will setting will
remain. remain.
The current The current
Slow setting will setting will
remain. remain.
The current The current
Slow setting will setting will
remain. remain.
- -
The current The current
3.0 setting will setting will
remain. remain.
The current The current
6 setting will setting will
remain. remain.
The current The current
Loud setting will setting will
remain. remain.
(Depend-
The current The current
ing on
setting will setting will
destina-
remain. remain.
tion)
The setting
(Depend- The current
will return
ing on the setting will
to the
pattern) remain.
default.
- -
-
-
87