Setting The Bobbin - JUKI DX-2000QVP Instruction Manual

Setting the bobbin

B
C
1
Put the bobbin in the bobbin case.
* Place the bobbin so that thread winds counter-
2
Thread groove A and B by pulling the
thread end.
* It will be easier to thread grooves when you
A
3
Thread guide C by pulling the thread to
left side.
When the bobbin is taken
out and/or put into the bob-
Attention
bin case, turn off the power
(turn to "O").
clockwise.
press the bobbin lightly with your finger.
21