Selecting The Stop Position Of Needle - JUKI DX-2000QVP Instruction Manual

3 Selecting the stop position of needle

You can select the needle position (needle-up or needle-down) when the
sewing machine stops.
* Default setting is the needle-down stop.
Example) To set the needle position when the sewing
machine stops to the needle-up stop:
<Display on the screen>
90
Press
.
Press
.
Press
.
The needle stop position is set to the
needle-up stop.
* The setting is memorized even when the machine is
turned off and on.
Single needle
Needle stops
at its highest
position
Needle stops
No
at its lowest
indication
position
Twin needle
Needle stops
at its highest
position
Needle stops
at its lowest
position
* In the case the needle stop
position is set to the "nee-
dle-up stop", the presser
foot pivot function is auto-
matically set to OFF.
Press
.
Several seconds
later.