One-Point Stitch/Sewing Letters; Preparation Before Sewing; Test Sewing - JUKI DX-2000QVP Instruction Manual

One-point stitch/sewing letters

Preparation before sewing

Fabric

Test sewing

Correct shape
78
Quilting: 03~80
Decorative 1: 01~80
Pattern
Decorative 2: 01~80
No.
Presser Manual buttonhole presser
foot foot (I)
Pattern
-
No.
Presser Manual buttonhole
foot
presser foot (I)
When right side is higher than
left side,
Adjustable range
~
Carry out the adjust-
ment while conducting
test sewing by pressing
Letters
(In order to sew a pattern neatly, apply
interlining and conduct a test sewing first.)
Use an iron to attach a fusible interlining to the wrong side of
fabric.
* When stitch length becomes too small, the bobbin thread
will come out to the front side of fabric and/or stitches
might get stuck. Therefore make sure to conduct a test
sewing beforehand.
Since the pattern might be deformed accord-
ing to the type and thickness of fabric and
fusible interlining to be used, make sure to
conduct test sewing on the same fabric and
interlining.
Carry out adjustment using the
optional functions.
(Refer to page 98 for details.)
When right side is lower than
left side,
Attention
Turn OFF the power
switch before replac-
ing the presser foot.
* In the case a quilting
pattern is sewn as the
one-point stitch, some
pattern shapes can be
different from those dis-
played on the screen.
Adjustable range
~
Carry out the adjust-
ment while conducting
test sewing by pressing